TRD Pro Wheels on 2nd gen with Nitto Ridge 295s? UCA issues?

[CadeeZ]

Hi all,

I tried searching but all I can find are Tundra owners and not sure if it’s 100% identical with the Sequoia...

I’m wondering if there’s anyone running TRD Pro BBS wheels with Nitto Terra/Ridge/Trail Grapplers 295/70/18 with no spacers and if it clears the UCA? Nittos are known to run bigger so I’m hoping there’s someone out there with this setup.

I’m having bilstein 6112s up front and 5100s installed in the rear tomorrow and wanted to beef up the tires. Not going with spacers because I’m going to tow frequently and I feel more comfortable without them.

Thanks in advance for any input!

 

[Jgrauman]

I'm going to say those are going to be extremely close to the UCA if not touching. It is the same front end as the tundra so if they are having success then go for it.

 

[ace402]

I had that size Nitto Mud terrains on my Tundra with no wheel spacers and they fit just fine.

 

[CadeeZ]

Thanks guys for your replies!

I slightly chickened out and went 285/70/18 Nitto Ridge Grapps...Rubbed on the skid plate full turn so I had to get it trimmed...I’m happy with the results, maybe I’ll do 295s next time around...

 

[JtFSU]

I just posted yesterday on tundras.com that I put a 3” level on my tundra and tried the 295/60r20 and they were scary close to the UCA. Playing it safe and ordered spacers as I was going to add them eventually anyway. I think some of the issue was that they hadn’t done the alignment after the lift yet.