Transfer Case C-Clip part numbers? (2 Viewers)

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

CharlieS

GOLD Star
Joined
Feb 4, 2005
Threads
442
Messages
9,087
I tweaked a c-clip in dissassembling a transfer case that I am regearing.

I am positive that I've seen a listing of the part numbers for the various thickness clips on this forum, but I can't find that post.

This one retains a gear on a shaft in the front output housing.

I tried google: site:IH8MUD Forum - https://forum.ih8mud.com/ "80-Series Tech" "transfer case" clip

Does anyone have a saved link to that post they can share?

I need the 'B' thickness c-clip.

IMG_8654.jpeg
IMG_8656.jpeg
 
Last edited:
I assume you mean this one?
1735573407942.png

1735573280271.png
 
What did we do before the EPC was available online?
 
Thank you. I may be reading it wrong, but that doesn't look like the right c-clip. Is there a site you used to find that info that you could share?

I think it is the "snap ring" on the far right on this diagram from the FSM.

1735583840964.png

This is roughly where it sat.
IMG_8661.jpeg
IMG_8662.jpeg
image.jpg
 
Last edited:
1735587776824.png
 
Thank you!

Ahh, Partssouq.

I think it is this one. Snap Ring options. I need 9052036020 (MARK B).
1735589266393.png


That area is the front output shaft, and the gear on my pictures is the hub transfer drive clutch (part 36239 in diagram above).

This pic just to show we are looking at the front output. They don't show the front output shaft in this diagram so it is harder to orient.

1735589324643.png


1735589263872.png
 

Users who are viewing this thread

Back
Top Bottom