Anyone know the gear ratio in the rearend (and front for that matter) for a 97 Taco with 3rz, and a five speed, 4X4. I'd look but figure this would be easier.
Josh
Josh
To lazy to look
- Thread starter cali-cruiser
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
The axle code for your rig can be found on the manufacture's sticker located on the driver's side door jamb as follows:
First digit:
A = 7.5" ring gear
B = 8" ring gear
Next two digits:
01 = 3:42
02 = 3:58
03 = 4:10
04 = 4:56
05 = 3:15
06 = 3:91
07 = 4.30
Last digit:
A = 2 Pinion, Open
B = 4 Pinion, Open
C = 2 Pinion OEM Limited Slip
Some '98-00 models have shown a BO code of "???" on the door plate; so far this turns out to be a 3.91 gear ratio, at least for the 5sp. RZN171L-CRPDKAB with factory 31s/265s should be 4.56 with the AT.
First digit:
A = 7.5" ring gear
B = 8" ring gear
Next two digits:
01 = 3:42
02 = 3:58
03 = 4:10
04 = 4:56
05 = 3:15
06 = 3:91
07 = 4.30
Last digit:
A = 2 Pinion, Open
B = 4 Pinion, Open
C = 2 Pinion OEM Limited Slip
Some '98-00 models have shown a BO code of "???" on the door plate; so far this turns out to be a 3.91 gear ratio, at least for the 5sp. RZN171L-CRPDKAB with factory 31s/265s should be 4.56 with the AT.
- Thread starter
- #3
thank you
