We have here everything to create a 3 link suspension, front or rear, and not low end stuff just to be cheap either!
The kit is wrapped around 6 of our 1.25" Heat & Cryo Treated Chromoly Heims with Stainless High Misalignment, Zink Plated Jam nuts, and 1.5" Tube ID Weld Bungs and another set of the same in 7/8" for the Panhard. We add our Chassis Link Brackets, a 10 degree Adjustable Axle Link Tower, a 10 degree Adjustable Frame bracket for the 3rd link, the Axle Lower Link brackets. We finish the Kit off with the Panhard setup, an Axle Offset panhard Bracket & the Frame panhard (Inside or Outside).
We do not include the tubing with the kit because you will save a lot of money buying your tube locally when you add the shipping cost of the tube, 2" x .25" wall DOM weighs over 7lbs a foot! But we are happy to add tubing in if getting it local is a pain for you.
If you need to change anything give us a call and we can mix & match til its right for you!
The kit is wrapped around 6 of our 1.25" Heat & Cryo Treated Chromoly Heims with Stainless High Misalignment, Zink Plated Jam nuts, and 1.5" Tube ID Weld Bungs and another set of the same in 7/8" for the Panhard. We add our Chassis Link Brackets, a 10 degree Adjustable Axle Link Tower, a 10 degree Adjustable Frame bracket for the 3rd link, the Axle Lower Link brackets. We finish the Kit off with the Panhard setup, an Axle Offset panhard Bracket & the Frame panhard (Inside or Outside).

We do not include the tubing with the kit because you will save a lot of money buying your tube locally when you add the shipping cost of the tube, 2" x .25" wall DOM weighs over 7lbs a foot! But we are happy to add tubing in if getting it local is a pain for you.
If you need to change anything give us a call and we can mix & match til its right for you!
Last edited: