You guys are great.
SWAP MEAT
AND SHOW AND SHINE SET UP FOR JUNE 20TH
SWAP MEAT
AND SHOW AND SHINE SET UP FOR JUNE 20TH
Swap Meet/Show & Shine at IPOR (1 Viewer)
- Thread starter Skrewball
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
couldnt resist could you.
Thought that was funny myself.
Thought that was funny myself.
Yeah - I got your meat right here buddy...
SWAP MEET
SCHEDULED FOR JUNE 20TH
ALL TOYOTAS WELCOME
9AM-TILL YOU LEAVE
HOSTED BY IRON PIG AND BAY TO BLUE RIDGE CRUISERS
SCHEDULED FOR JUNE 20TH
ALL TOYOTAS WELCOME
9AM-TILL YOU LEAVE
HOSTED BY IRON PIG AND BAY TO BLUE RIDGE CRUISERS
Cam,
If you guys don't mind having a few FJ Cruisers there drooling over your trucks, I'll invite a few friends of mine down to this event.
Sounds like a lot of fun.
What kind of meat should we bring?
If you guys don't mind having a few FJ Cruisers there drooling over your trucks, I'll invite a few friends of mine down to this event.
Sounds like a lot of fun.
What kind of meat should we bring?
Here's meat and a Toyota.
Cam,
If you guys don't mind having a few FJ Cruisers there drooling over your trucks, I'll invite a few friends of mine down to this event.
Sounds like a lot of fun.
What kind of meat should we bring?
Bring them it should be good fun.
Placed on TTORA Forum today...
SWAP MEET & SHOW & SHINE Saturday, 20 June, Fredericksburg, VA
Bay to Blue Ridge Cruisers, sponsored by Iron Pig Offroad (IPOR), is conducting a swap meet and show and shine at the IPOR shop in the Bowman Center in Fredericksburg, VA on Saturday, 20 June starting at 9:00
am. Highlights follow...
- Many entrants who have to clean out their garages for new projects are bringing truck and trailer loads of spare parts and maybe even vehicles.
- IPOR is hosting a pick and pull from their huge inventory of spare parts.
- Tour of IPOR facility and some of their amazing projects.
- Show & Shine featuring awards for...
* Best of Show
* Most Coveted
* Most Trail-worthy
- Food and drinks for sale
- Rare and highly prized BBRC-wear available for purchase
- Articulation Ramp
Directions: 11812 Main Street, Suite C104, Fredericksburg, VA 22408
web link: http://www.mapquest.com/maps?city=Fr...&zipcode=22408
Bay to Blue Ridge Cruisers, sponsored by Iron Pig Offroad (IPOR), is conducting a swap meet and show and shine at the IPOR shop in the Bowman Center in Fredericksburg, VA on Saturday, 20 June starting at 9:00
am. Highlights follow...
- Many entrants who have to clean out their garages for new projects are bringing truck and trailer loads of spare parts and maybe even vehicles.
- IPOR is hosting a pick and pull from their huge inventory of spare parts.
- Tour of IPOR facility and some of their amazing projects.
- Show & Shine featuring awards for...
* Best of Show
* Most Coveted
* Most Trail-worthy
- Food and drinks for sale
- Rare and highly prized BBRC-wear available for purchase
- Articulation Ramp
Directions: 11812 Main Street, Suite C104, Fredericksburg, VA 22408
web link: http://www.mapquest.com/maps?city=Fr...&zipcode=22408
I will have a bunch of stuff from my parts truck to get rid of, Tim if i dont see you before i will bring the PS box you wanted to the swap meet.
-Matt
-Matt
Does anyone know who this guy is, He keeps saying he is going to be here or there but we never see him
Pot calling kettle black
cam
Can we make it an O-ficcial BBRC club meeting? My new trike club is no where near as cool as you guys (Mr. Jester, Sir, I'm suffering from delusional confusionals...)
Well Cam, I guess that means grilled goat is off the menu for the swap meet.
Thanks you Pork-eatin' Infidel!
Thanks you Pork-eatin' Infidel!
Hey Cam
Im looking at bringing the stinky from NJ ( there maybe 3 70s comming )
I'm moving out of my shop so I will post pixs of stuff I may bring to the swap meet .
Thanks BtoBR and IPOR for having this
Im looking at bringing the stinky from NJ ( there maybe 3 70s comming
) I'm moving out of my shop so I will post pixs of stuff I may bring to the swap meet .
Thanks BtoBR and IPOR for having this
My Canadian m101 trailer is officially for sale. I can arrange to bring it to the swap meet if anyone is interested. Sorry, can't do pictures right now (7k+ miles away from my back yard). $1,250 includes a spare wheel/tire. Tires not so good (original, I think). Only surface rust, permanent Va. title, functional lights.
6 days and a wake up!
6 days and a wake up!
Well in keeping in the spirit of Tim's post.....I plan on bringing my White 1984 FJ60 and all spare parts up to the swap meet. I need the space in the garage and the money. So if you know of anyone looking for a clean project, let them know.
IPOR
IronPigOffroad.com
Hey guys - just put a list up on the IPOR site of what used parts we're offering for the club to sell. There are 5 pallets, all sorted and labelled. These are not junk parts - they're good parts, and the prices are pretty cheap too.
(the line below is a clickable link to the used parts page)
Iron Pig Off Road : Toyota 4WD experts
BBRC Swap Meet Parts
Radiator$25
Fan Shroud$10
Radiator support$10
Fan$10
Fan clutch$20
Carb cooling fan$20
FJ60 heater core$10
FJ40 heater assy$25
FJ60 rear heater$30
FJ40 rear heater$30
Motor mount $5
Air Cleaner assy$15
Brake booster single$80
Brake booster double$100
Rebuilt center arm assy$25
tie rod and drag link set$20
SOA double steering arm$40
PS gearbox - buick$50
PS gearbox - jeep$50
PS gearbox - chevy$20
PS gearbox - minitruck$100
PS pump - FJ60\62$50
PS pump - minitruck$10
Distributor - electronic 40/60$100
Distributor - points$40
Distributor - mallory$60
York Compressor$150
FJ60 A/C compressor$50
Alternator$30
Coil$5
Coil + Ignitor$60
Starter - chevy 350$25
Starter - Large case F/2F$20
Starter - gear reduction$50
2F Aluminum valve cover$20
In/Exh Manifold set$100
Hedman shorty V8 headers$100
smog pump$50
Webber carb$80
2F carb$60
3spd vacuum shift tcase$150
81-84 4spd & split case combo$400
Birfied joint$25
Axle & birfield combo$50
HTH,
(the line below is a clickable link to the used parts page)
Iron Pig Off Road : Toyota 4WD experts
BBRC Swap Meet Parts
Radiator$25
Fan Shroud$10
Radiator support$10
Fan$10
Fan clutch$20
Carb cooling fan$20
FJ60 heater core$10
FJ40 heater assy$25
FJ60 rear heater$30
FJ40 rear heater$30
Motor mount $5
Air Cleaner assy$15
Brake booster single$80
Brake booster double$100
Rebuilt center arm assy$25
tie rod and drag link set$20
SOA double steering arm$40
PS gearbox - buick$50
PS gearbox - jeep$50
PS gearbox - chevy$20
PS gearbox - minitruck$100
PS pump - FJ60\62$50
PS pump - minitruck$10
Distributor - electronic 40/60$100
Distributor - points$40
Distributor - mallory$60
York Compressor$150
FJ60 A/C compressor$50
Alternator$30
Coil$5
Coil + Ignitor$60
Starter - chevy 350$25
Starter - Large case F/2F$20
Starter - gear reduction$50
2F Aluminum valve cover$20
In/Exh Manifold set$100
Hedman shorty V8 headers$100
smog pump$50
Webber carb$80
2F carb$60
3spd vacuum shift tcase$150
81-84 4spd & split case combo$400
Birfied joint$25
Axle & birfield combo$50
HTH,
Skrewball
TLCA#18502
- Thread starter
- #39
after talkin to Cam, we decided that using his grill for the cooking at the swap meet was not gonna work.
i offered to use my grill which is smaller and not nearly as shinny, but it works.
the cooking surface measures 21" deep by 27" wide with a warming rack/hot dog cooker that is about half the size. it also has a side burner and a side sink(small pan that holds water)
i only have one tank, so if anyone else could bring one that might be a good idea.
my question is: Do you guys think it will be enough?
i offered to use my grill which is smaller and not nearly as shinny, but it works.
the cooking surface measures 21" deep by 27" wide with a warming rack/hot dog cooker that is about half the size. it also has a side burner and a side sink(small pan that holds water)
i only have one tank, so if anyone else could bring one that might be a good idea.
my question is: Do you guys think it will be enough?
I have another small grill that I can bring. I also have a few propane tanks that I can get filled to bring as well. Like last time, I make a bunch and then wrap them in tin foil and put them in the warmer. It worked last time, so it should work again.
