swamper sizes (1 Viewer)

[Rocknroll]

I'm probably gonna get slapped for this and told to go "search" myself, but I believe this may be too specific. I had planned on running 35x12.50 15s on my rig but just realized swamper doesnt offer such an animal. Will the 36x12.50 fit my rig with 4"hfs and 2.5" shackles? And just for funnies, what about the 35x15.50 sx? Also what are you guys' opinions on the Nitto mud grappler?

 

[rusmannx]

with 6.5 inches of total lift i believe you could clear 38's with some trimming. 36's shouldn't be a problem.

 

[peebles24]

I was kind of wondering what tires I could get under mine as well. It is SOA with 2" of body lift. I know it has had 36's on it before but I was wondering about 37's so I could go with a set of BFG Krawlers.

 

[missipboy]

i have 35x12.50 swampers on 15's.

 

[Rocknroll]

Am I correct with these sizes or is there a disributor that has 35s in the tsl radial?

 

[PUPTLAM]

I am running 36"Super Swampers with SOA and no lift.

 

[PUPTLAM]

Here is the picture I tried to post of the tires. The rig is a 70 FJ40 with a 77 2f motor, SOA lift, lockers front and rear, home made skid plates, 4 wheel disk brakes, power steering, 5 point harnesses, warn M8000 winch, High lift jack, all needed spare parts and so much more.

 

[haystax]

The Q78 size is ~35" and fairly narrow - try this www.intercotire.com

 

[Bull22]

I am running 35's on my fj with a 4 inch susp lift and a 3 inch shackle lift. I could fit much bigger though. So you should have no prob.

 

[Rocknroll]

Is 12.50 as wide as i can go or could I run the 35x15.50 sx?

 

[lingo]

Is 12.50 as wide as i can go or could I run the 35x15.50 sx?

That would probably depend on intended use. For mud i would use the 15.50. crawling i would go with the 12.50.