Stereo wiring harness?
- Thread starter jay3253
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
I got my Metra harness from Crutchfield. They included it when I bought the Double DIN. I purchased the brackets from Camelback Toyota and the hardware such as antenna splitter and solder seal connectors from Amazon.
Usually you can easily splice the new stereo wires into the stock harness. Not familiar with 100 series though.
You don't mention year, or LC/LX. From what I understand, aftermarket harnesses for (at least some of) the LX are either unavailable (or very hard to find), while the LC harnesses are readily available.
On our 2000 TLC, we found we could use:
One of these these three, if we were going to try and keep the OEM amplifier:
One of these if we were planning on bypassing the OEM amplifier and using speaker outputs from the head unit:
We found these available on Crutchfield/Amazon/eBay
On our 2000 TLC, we found we could use:
One of these these three, if we were going to try and keep the OEM amplifier:
Metra 70-8113 Amp Integration
DNF 70-8113 Amp Integration
BEST KITS BHA8113 Amp Integration
DNF 70-8113 Amp Integration
BEST KITS BHA8113 Amp Integration
One of these if we were planning on bypassing the OEM amplifier and using speaker outputs from the head unit:
Metra 70-8116 Amplifier Bypass
These to adapt aftermarket speakers to OEM harness:
Metra 72-8104
We found these available on Crutchfield/Amazon/eBay
