Stereo wire functions?

[SR.GRINGO]

Any ideas on where I can find a diagram of which wires are what on the Toyota side of the wire harness? I need to find the power antenna, pin for the back up camera, ACC, ground, headlight for illumination.

Can't decide if I should run a dedicated power wire for the stereo....the amp will have a 4 AWG ran direct.

This is an 06 Sans Navigation.

 

[re_guderian]

I can't help with how new your truck is, and you have the ultra-rare non-nav option, but in my 2000, the stereo is actually powered (and grounded) through the amp. When I put in a new head unit, I ran a dedicated ground, but not a dedicated power.

, for some reason I can't upload a doc. PM me your e-mail and I can send you a .pdf of the EWD for the radio in 2000 if it would help...

edit: -> I've posted it up here before, here it is.
https://forum.ih8mud.com/showpost.php?p=6977565&postcount=36

 

[SR.GRINGO]

Thanks Rob,

This is quite the project...installing new speakers, new speaker wire, new amp, back up camera, head unit, remote steering controls, etc. I read your install thread...really hope I do not need to drop the head liner to mount the microphone....those curtain air bags make me nervous.

Where did you find the EWD...thinking maybe I should buy some for my model year. I have the hope the wires are the same color as the 2000 model year.

The best part is when this project is completed I get to start on our other non-Navi Cruiser for the same install. Might utilize the stock speaker wires on this build.

Really appreciate the PDF

 

[re_guderian]

www.books4cars.com

 

[RobRed]

The 04 EWD should have both configs for the wiring

I'll PM you back,