so it begins...

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Feb 11, 2008
Threads
44
Messages
304
Location
SoCal
Never done it before on any vehicle, but tomorrow, the A440 is coming out of my 62. One way or another. I'll post some pics as I pull it, and then the swap process. :cheers:
 
I purchased a used tranny that will be installed, with an Extreme Valve Body.
 
just did it to mine,bought a used one and swaped it,by the way, when switching out the parts from one trans to the other dont forget the parking brake pin that holds the parkingbrake mechanism like i did.now i will have to go back into the transfer case again to correct it. OOPPS! BY THE WAY I CAN E-MAIL YOU A LINK FOR THE MANUAL FOR THE A440F LET ME KNOW
 
yes manual for the trans would be awesome. BTW finally got around to pulling it today. It was hard...lots of little things, never pulled one before. But after lots and lots of sweat, and blood, and dropping it off the jack...:bang:...its out and so begins the transfer reebuild and swap next weekend.
 

Users who are viewing this thread

Back
Top Bottom