- Location
- United States
91 Toyota Pickup 4x4 V6 5speed 282k
This has been a great truck, I got it at 199k and have had it for 10 years.
2004 Tacoma wheels
32" Goodyear wranglers, maybe 1/3 tread left
4 Hella 500's on front bumper
Cold air intake (isr mod)
Cat delete
Flowmaster 40 with turndown
Black UWS toolbox
Hi-Lift jack mounted on toolbox
Yakima bike mounts on toolbox
SONY head unit with usb/aux
Alpine mono amp
12" kicker sub
Wired for CB
Blacked out tail lights
Add a leaf in rear suspension
Head gasket replaced at dealership due to recall before I owned it. Clutch was slipping when I bought it so a new one was installed shortly after. Besides regular maintenance, only things I've done to it until recently is a radiator, thermostat, water pump, battery, distributor, NGK wires, NGK plugs, shocks, and muffler. Oil changed regularly.
In last 6 months:
Upper ball joints
Lower ball joints
Inner tie rod ends
Outer tie rod ends
U joints
Power steering pump
High pressure steering hose
Steering box
Valve cover gaskets
Flowmaster 40
Front end alignment
Sylvania Silverstar Ultra headlights
Bosch Wipers
AVS Ventvisors
Truck has dents, scratches, and dings mainly from where pine tree fell on the bed/roof. Also clear coat is fading on hood and roof. I have the valence panel that goes under the front bumper. No rear bumper. A/C hose blew awhile back and I installed a new one but have not gotten freon filled. Interior is in good shape besides tear in drivers seat and crack in dash. Have had floor mats in it since day one. Recently check engine light has been on and making it run rough/loss of power. I think it needs a new ignition coil on cylinder #3, I will try and replace it soon but if not we can negotiate lower price.
$3500 obo
Pics can be seen on charleston craigslist.
Thanks for looking
This has been a great truck, I got it at 199k and have had it for 10 years.
2004 Tacoma wheels
32" Goodyear wranglers, maybe 1/3 tread left
4 Hella 500's on front bumper
Cold air intake (isr mod)
Cat delete
Flowmaster 40 with turndown
Black UWS toolbox
Hi-Lift jack mounted on toolbox
Yakima bike mounts on toolbox
SONY head unit with usb/aux
Alpine mono amp
12" kicker sub
Wired for CB
Blacked out tail lights
Add a leaf in rear suspension
Head gasket replaced at dealership due to recall before I owned it. Clutch was slipping when I bought it so a new one was installed shortly after. Besides regular maintenance, only things I've done to it until recently is a radiator, thermostat, water pump, battery, distributor, NGK wires, NGK plugs, shocks, and muffler. Oil changed regularly.
In last 6 months:
Upper ball joints
Lower ball joints
Inner tie rod ends
Outer tie rod ends
U joints
Power steering pump
High pressure steering hose
Steering box
Valve cover gaskets
Flowmaster 40
Front end alignment
Sylvania Silverstar Ultra headlights
Bosch Wipers
AVS Ventvisors
Truck has dents, scratches, and dings mainly from where pine tree fell on the bed/roof. Also clear coat is fading on hood and roof. I have the valence panel that goes under the front bumper. No rear bumper. A/C hose blew awhile back and I installed a new one but have not gotten freon filled. Interior is in good shape besides tear in drivers seat and crack in dash. Have had floor mats in it since day one. Recently check engine light has been on and making it run rough/loss of power. I think it needs a new ignition coil on cylinder #3, I will try and replace it soon but if not we can negotiate lower price.
$3500 obo
Pics can be seen on charleston craigslist.
Thanks for looking
