RJ70 1988 Coils all round, Chassis Measurement

[watrob]

Hi, I commencing a new build, 40 series fibreglass tub on a RJ70 series chassis, the photo below is of a 40 series chassis, I am trying to find same measurement on a RJ70 series chassis but all the chassis plans I have come across don't show this measurement?

 

[Chester]

if it is the same on an LJ70, I can get that for you this afternoon.

 

[watrob]

That would be great because every manual I look at does not does not indicate this length, or its a leaf spring version which again has no indication of length either, thanks.

 

[kbushnz]

Here are a couple of pics I picked up trolling the net a while back... They are from a chassis straightening system...

 

[Chester]

Does the above from kbushnz solve your need, it's probably more accurate than my tape measure. not the tape, but the measurer.

 

[watrob]

The centre of the rear axle the red line on the left to the right hand red line is around 508mm, but am trying to find out the length from the red right line to the end on the chassis "blue line"

 

[watrob]

I finally got the measurement, it's 800mm.

Can anyone point me to the Chassis & Body Manual RM183E? it covers the LJ & RJ70 series.

 

[watrob]

It's all mine, RJ70 1988, this will take 80 series early model coil springs which I need as it is going to have a 12HT with 5 speed installed with 43 series fibreglass sports tub.