Reviews for TCC Rear Bumper?

[kdubbya]

Your fenders are wide open? I don’t understand

So I installed the lra 40 gallon aux immediately before the bumper. I removed those plastic under side pieces behind both wheels in the fender area and now they're just expose. I guess I looked at the bumper in the shipping container and assumed it would cover them. I'm in the process of just making some metal covers to protect the ac compressor on the passenger and the fuel filler neck on the other.

 

[TeamShiftPoint]

I have the TCC rear bumper and dual swings sitting at the shop. Got it 6 months ago. Need to find some time this month to install.

 

[ironmountain]

To those who have a TCC bumper, does your rear tire carrier upright stand vertically or stick out towards the rear?
TCC posted a 200 on their Instagram (in Australia) and I noticed that their rear tire sits much closer to the door than mine.
Long story short I reached out to that owner and we compared. I’d much rather have the tire sit closer to the vehicle.

Mine:

Theirs:

Mine:

Theirs:

 

[kdubbya]

It also looks like the swing arm is closer to the body of the vehicle as well. I'm planning to reconfigure the latching mechanisms on the swing arms to spring style lift arms and drill the guides into the top of the bumper. Should bring the tire in a bit more and get rid of those hooks and handles waiting to tear my thigh open. Angled tire bracket might still be an option even after that so I'm curious too. Also, how high off the top of your vehicle does your prinsu sit? I'm fixing to install mine and just wanted to be sure I could get it in the garage post install. I asked prinsu and it should work but wanted to see if an actual owner had some thoughts. Thanks!

 

[ironmountain]

It also looks like the swing arm is closer to the body of the vehicle as well. I'm planning to reconfigure the latching mechanisms on the swing arms to spring style lift arms and drill the guides into the top of the bumper. Should bring the tire in a bit more and get rid of those hooks and handles waiting to tear my thigh open. Angled tire bracket might still be an option even after that so I'm curious too. Also, how high off the top of your vehicle does your prinsu sit? I'm fixing to install mine and just wanted to be sure I could get it in the garage post install. I asked prinsu and it should work but wanted to see if an actual owner had some thoughts. Thanks!

View attachment 3833623

Dang these are at least 3 different versions of the upright. You have the same as the Aussie one I posted minus the angle.

As for the Prinsu, it adds a few inches but I can no longer fit into my garage. I’m about 1/2” too tall. I can get an exact measurement for you today or tomorrow.

 

[xeuxaz]

Hey Guys,

Sorry for chiming in late here. Here are a handful of detailed pictures of the rears. They are all satin black, Quarter hoops and have a double Jerry/ Propane&jerry holder and spare carrier.

- 7 pin is not relocated at this stage but I will work with TCC to make a bracket
- Rear camera relocate is not avail at this stage but working on a Jerry mount with them as an add on hopefully.
- All hardware is Grade 8 Zinc and or stainless
- Sensor knockouts are present.
- Billet swing out seats and spindle cover
- Also the powder coat is phenomenal, reminds me of old school ARBlike the old 80 front bars. I have been very impressed with the durability on my 80s armor.

As far as weight. The Bumper itself no swings is around 120-130lbs, the full kit with everything is around 180 -195 lbs.

Please let me know if you have any questions. We will have all bumpers for all cruiser in stock and rolling in as soon as we can get them.

My cell is 208-906-24 one one.

Regards,
Aidan Stott

Is the 7 pin relocated now?

 

[xeuxaz]

My installer mounted the 7-pin underneath. Overall, I am pretty happy with it given the cost/sale with LRA. (Finally, room for the 24 gallon)

 

[gasman4u]

My installer mounted the 7-pin underneath. Overall, I am pretty happy with it given the cost/sale with LRA. (Finally, room for the 24 gallon)
View attachment 3951247
View attachment 3951249

Looks good! What’d you do with your reverse camera?

 

[xeuxaz]

Looks good! What’d you do with your reverse camera?

Waiting on the kit to relocate to the center of the lift gate. When that gets sorted I’ll share pictures.

 

[gasman4u]

Waiting on the kit to relocate to the center of the lift gate. When that gets sorted I’ll share pictures.

Did you use the kaymar camera relocation harness or something custom? One of my hang ups is the relocation of this camera for this mod.

 

[xeuxaz]

Did you use the kaymar camera relocation harness or something custom? One of my hang ups is the relocation of this camera for this mod.

When it gets installed I’ll share more details.

 

[xeuxaz]

Toyota Landcruiser 200 series GXL 2016-2021 Reverse Camera Upgrade + R

This exclusive kit has been designed and manufactured by us in Australia. It will allow you to easily relocate the reverse camera into the centre position and the door lock / unlock button off to the side. This is a MUST HAVE for backing up directly into a trailer, it will allow you to line up...

customcarstereosystems.com.au

 

[brasskey]

View attachment 3951694

When it gets installed I’ll share more details.

Hope is works for you.

 

[xeuxaz]

Hope is works for you.

Yeah sorry I linked the wrong one originally. Check this one out. Toyota Land Cruiser 200 Series Reverse Camera Relocation Kit - https://customcarstereosystems.com.au/products/toyota-land-cruiser-200-series-reverse-camera-relocation-kit?pr_prod_strat=e5_desc&pr_rec_id=3c2b79258&pr_rec_pid=9101280772325&pr_ref_pid=8450412314853&pr_seq=uniform