real time brake help please

[cruisertom]

I have put a 81 truck master and booster on my cruiser. I was wondering if any of you pickup guys know which outlet of the master cylinder goes to the front circuit and which to the back? I have the fronts hooked up to the outlet closest to the firewall and the rear to the furthest from the firewall. I am not having much pedal pressure. There is a F and R casted into the casting. In the past the closest outlet is always the fronts. I have the rears hooked up to the outlet with the F near it and the fronts with the R in it. Are toyota truck masters different from most or am I imaginging things? Any ideas? Thanks for your help. Tom

 

[WristPin]

i took some pics.
maybe it will help.

 

[WristPin]

the stick in the last pic is the rear line coming out of the master.

 

[Bob_Garrett]

Not at home right now, so I can't go out and verify it, but I think the outlet nearest the firewall goes to the rear brakes.

 

[2ndGenToyotaFan]

Nearest the firewall is the rear brakes and the front out put is the front brakes. So F=Front and R=Rear.

 

[cruisertom]

thanks everyone that really helps, and it fixed my problem. Thanks again. Tom