Rake to Squat with 43136-60020 Coil Spacers

[MRego]

Absolutely. Toss some 20mm or 30mm and enjoy the mild lift all around, while keeping the excellent suspension tune and ride of factory.

20mm or 30mm spacers? Any suggestions on what brand/manufacturer? Tks!

 

[TeCKis300]

They're pretty generic. Possibly Slee and other LC tuners carry them. Most 80/100/200 series use similar ones. I think the 200-series has a larger inner diameter requirement from the integral spring bump stop, but they're all generally compatible maybe with some slight tweaks.

Haven't used this in particular but looks compatible with the 200
Amazon product ASIN B07CB3QNMC

 

[MRego]

They're pretty generic. Possibly Slee and other LC tuners carry them. Most 80/100/200 series use similar ones. I think the 200-series has a larger inner diameter requirement from the integral spring bump stop, but they're all generally compatible maybe with some slight tweaks.

Haven't used this in particular but looks compatible with the 200
Amazon product ASIN B07CB3QNMC

Thanks. I will look them up. 30mm seems to be on point for using with the front OEM spacers.

 

[MRego]

Rear spacers installed. Went with the 15mm option and now I have my factory rake back. Measured before and after. Gained 1 inch both sides in the back. From 36” to 37”. Since the OEM front spacers add a lift of 1 inch to the front, I believe I now have an overall 1inch lift front and back. Which to me, for now, seems perfect.