Project Blackout - 100 Series Herculiner Trim and Bumpers

Before OR After? be honest...even though its basically permanent


  • Total voters
    13

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Sep 16, 2016
Threads
7
Messages
32
Location
NorCal
Love my Yota 100 series...has 172k on it and runs better than when I first bought it over a year ago.

Seafoam, lucas, & cata clean are what Ive used mostly to clean the s*** out of the internals and they work wonders and smooth idle, improve mpg, etc

Just recently finished about 80% of Project Blackout which was to roll on herculiner bed liner on my ugly tan trim and bumpers.

Herculiner quarts are sold at your local oreilly or pep boys for $30 and roller at lowes for $3.

Total time invested 6-8 hours, total $85ish...and Im extremely happy with the results.

5CA42383-5B84-4F4E-B525-ACA84F02742D.jpeg


955EFFB9-0F15-4D38-B976-F6EF27F85006.jpeg


4F0E50E9-5E99-4145-B6D9-8356A82CE197.jpeg


2321ACCD-2358-46E2-BB77-95926177C913.jpeg


230A0F9C-92F5-496E-BD4C-5B08B1BF397F.jpeg
 
Honestly I think a dark graphite color rattle can would look better. Those bedliners belong undercarriage and in truck beds, I wouldn’t use it on the exterior.

Are you doing the bumpers as well?
 
Hard to tell with the blue tape still on there. This is interesting - keep going and post pics.
 
I'm in the middle of doing this too, just bedlined my rear bumper and thinking of doing the rockers under the trim to match. Does the roller system work well?
 
I'm in the middle of doing this too, just bedlined my rear bumper and thinking of doing the rockers under the trim to match. Does the roller system work well?

Yes it does but make sure to use the cheaper sponge roller vs the better cloth rollers for real paint.

Can you post some pics? im about to post the 90% completed pic soon once this fog burns off
 
20171022_140044-01.jpeg


Here's what the rear bumper looks like with Duplicolor bedliner, gonna be leaving my trim white and painting the rockers under to match front bumper level.
 
Bump. Can anybody tell me about how many quarts, or how many rattle cans, it takes to do the bumpers?
 

Users who are viewing this thread

Back
Top Bottom