Is there a number on the preload that the spring inside the clutch slave cylinder puts on to the clutch fork. (and pressure plate).
I ask this because at full clutch depression, a large part of my slave piston is exposed. A longer rod would slove this, but put more spring tention ( pre load ) on to the fork. I am using HZ slave and rod on a HD conversion, so soI may have something wrong. It all works, but I'm not happy that all is correct.
G
I ask this because at full clutch depression, a large part of my slave piston is exposed. A longer rod would slove this, but put more spring tention ( pre load ) on to the fork. I am using HZ slave and rod on a HD conversion, so soI may have something wrong. It all works, but I'm not happy that all is correct.
G