Power Steering pulleys (1 Viewer)

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
May 14, 2008
Threads
27
Messages
856
Location
Bee Cave, Tx
Need a little help, I am trying to locate another pulley for my power streering on my fj 40. It is a saginaw pump (GM) with a 3/4 in shaft. I need a press on pulley that will run a 15/32 (or 1/2 in.) v-belt which is a little wider than the 13/32nd v-belt I am running now. My current set up as you guys who's been out with me knows, sounds like I need to adjust my belt when it is actually really tight:censor:. Anyone have an idea as to what vehicle or where I might find such a pulley:bang:? I know someone's going to say salvage yard:wrench:, which is fine, but what vehicle do I look for to find one? Or is there one even available. I am trying to match the stock pulleys on the 2f motor which is quite a bit wider (groove) than the pulley I have. Any thoughts or ideas?

Thanks
 

Users who are viewing this thread

Back
Top Bottom