pig doors

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

VETTE60

VETTE60

10 Year 15 Year 20 Year
Joined
Oct 10, 2004
Threads
198
Messages
1,455
Location
Pollock Pines,CA
Location
United States
I have a full set of pig doors in decent shape. also have the tail gate but no glass in the tail gate. the motor works, just tested it. doors are in decent shape. no dents, glass intact, rears have decent pannels, fronts do not. hinges are good. the drivers side seems to have the hinge pannels re- welded in. some lights surface rust. build some 1/2 doors for the summer!!

asking $200 for all also have the 2 rear windows in excellent shape $$40

have the rear heater. no leaks, core looks great. seems to work fine $25

all prices OBO. come and get it


sacramento / placerville area.
P1060398.webp
P1060400.webp
P1060402.webp
 
Hey Chris, I guess you're jumping on the pig project. My bad ass rig probably got you going eh? Ha ha. I would like the tailgate only if it does not have any rust, beyond surface. Mine is slightly rusted through so I should bank that puppy. Pm me what you would like for it if you'll separate it from the group.

Cheers!
 
tail gate is your stew. I'll hold it for you and you can see if you want it. some light rust, but not through holes. should blast out with a sand blaster. I also will probably have some more odds and ends. you are welcome to come pick through before I tear it completely apart

BTW it is snowing like crazy here right now. my wife is out cross country skiing in the neighborhood. I am thinking those poor road bikers in the Amgen are not going to be racing on time...lol
 
chit chat attack!

Thanks for that. I am in on the gate. I can't get it until after May 25th at least. 50 is closed. OH yeah, does the switch on the gate work? If so, can you burn me an extra key for it? If you can't find key blanks, I know a guy in Truckee who has about 25 for the 72 pig. My switch doesn't work. Also interested in the speedo if you don't want it.

Told a few folks about the doors. Yeah... 6 inches of snow in Tahoe. I'm not staffing the engine for the race... strep throat!

Race is going off at 1pm... should be some good wrecks...

OK Enough chit chat. Bump for nice doors.
 
Still have the doors? What year? I need a front driver side door for a '77 model year (11/69). Looks like there are several different toyota part numbers for different years:
03/69 - 06/70
06/70 - 09/73
09/73 - 05/77
05/77 - 07/80

Not sure if there is a difference???
 
Differences I know about between the years:
03/69-06/70 Housing on the star latch and striker plate are different and must be changed if door is to be used on later years
06/70-09/73 Still have the vent windows in front doors ala the earlier years
09/73-05/77 No vent windows, angular top of one-piece front door windows
05-77-07/80 No vent windows, rounded top of front door windows
There may be other differences I'm not aware of.
 
Last edited:
Pm'd you
 
Corrugated Toy said:
Do you still have the rear heater? Do you have the pipes to go with it?

Thanks
Click to expand...

still have the heater, i'll check on the pipes, but i think there were just hoses attached. not sure what the stock set up was
 
Chirs,
I am out on the rear gate. I am buying a 72 from a friend and it comes with an extra... I'll probably part it all out.

Cheers!

Sal
 
bigsal said:
Chirs,
I am out on the rear gate. I am buying a 72 from a friend and it comes with an extra... I'll probably part it all out.

Cheers!

Sal
Click to expand...

cool, no prob. is it the one from truckee?
 
Interested in doors

Vette60,
I would be interested in the doors. I need a drivers front door for a 73. It seems from the earlier comments, the doors would match, I would need to swap out star latch/striker plate. Kukupig is in front of me and maybe one other person. If they do not want I would like to get. I would take all 4 that you listed so you would not get stuck with parts you don't need. I would also take tailgate since you sort of bundled it but mine is in good shape so I don't really need.
Thanks, Charlie
 
You must log in or register to reply here.

Share this page

Back
Top Bottom