Hi everyone. i’m dealing with an issue, which is the pre-collision system in my 2016 Land Cruiser 200 series is pain in the acid will not go away. The reason how it came on was that I replaced the original emblem because it was faded and put a new one on my dumbass did not use that I had to buy an original from Toyota so I bought one from eBay as soon as I put that on this message came up then I replaced the eBay one with the actual emblem grill garnish in them from Toyota, which cost me about $345 and I installed it hoping that the message will will go away. It did not. I did some research and you know from cleaning the sensors to making sure the windshields in the server is clean. Also, the fuses are all good to go and nothing is wrong. Did all of that however, I cannot get rid of this freaking message which keeps saying pre-collision system unavailable and due to that the cruise control is also not working. That’s my issue. I would really appreciate if anyone else has experience such an issue or anyone who has any pointers of what else could I look at before having the vehicle to build a Toyota which I very much trained and trying to avoid because of the obvious reasons again if you have seen her or have any information about how to go about this and fix it? I would really appreciate it. Thank you.