DickM
SILVER Star
PM sent on parts
Parting Out FJ62 in Philadelphia
- Thread starter Gardenplot
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
- Thread starter
- #62
Hey all,
Been hard at work but wanted to post a big list and give an update. I thought the truck was going to pasture, but fellow Mudder Pacer kept it alive. He's doing a great diesel conversion on his truck, and figured that my frame might be a good place to mock it up in. So here's a list of stuff that's available. If you have at one point asked for something on this list and I either didn't reply or said someone else was taking it, just let me know and I'll give you dibs. I had some sales fall through over the last few weeks. Everything is avaliable for local pick up, but i've listed below the stuff i would be willing to ship. PM if you're interested in anything. As stuff sells, i'll double back to strike through the post. If you don't see it on here, feel free to ask for it. Payment is cash or paypal for local pickup, paypal for shipped.
local pick up:
fj62 long block 3FE - $300 - engine ran and cranked before I started having troubles with fuel lines and suspension. No major oil leaks. Priced to move becuase I need this gone so pacer can mock up his diesel install.
Catalytic convertors - $70.00 a piece, $120 if you take both
any section of flooring - good floor great for patch panels - PM me about price if you need something
Seats - good shape, no tears, head rests included
Front seats - $150 a piece - had two sellers fall through so if you asked me for this early on just
remind me and i'll give you dibs.
Rear Bench upper - $100
Rear Bench Lower - $75
Hood - $50 - red, one small dent in the front, all hardware included, no rust issues, fireproofing is missing.
Rear Bumper - $40 - Chrome is nice but it's dented...you'll pass inspection in PA
Frame - $600 - minimal rust, minor issues around bumpers. PM and we can talk. can throw in axles as well
Cargo Glass - $20 a side
Steering column - $200
Center and front carpeting - it's not pretty, but there are no tears. $75 for the center, $100 for the front, $150 if you take em both. I might consider shipping these.
Roof - I can cut it off - $150
Stuff I'll ship or you can pick up locally:
Fuel Filler Neck - $50 - no issues
Alternator - $70 - was working good when I pulled it out
Glove box grab handle - $40 - lookin
Mass Airflow Sensor - $175
Brake booster - $100
AC Compressor - $80
ECU - $100
Rear View Mirror - $20 - lets you see behind you
Grab Handles - $10 each
Glove Box Door - $20 - looks good
Radio - $30 - This powers on but has stopped working - if you want to tinker with it's yours. If you pick something up i'll throw it in free
Rear Seat belt lap belt - $25
Rear Seat Belt Shoulder Harness - $80 a side/$140 for both
Grill - $70 -
Man a fre knuckle bearing kit - see here: https://forum.ih8mud.com/sale-parts/696666-pa-man-fre-knuckle-bearing-kit-w-wheel-bearings.html Was gonna do this install but I didn't, you'll save about $50 bucks of a quality set from Man A Fre
Rear Speakers with metal covers - $50 a side, $80 for both
Things that are gone:
doors
transmission
power steering pump
tail gate
02 sensors
front seat belts
side view mirrors
AC amplifier
rims will go on ebay
all chrome trim around windows, rain gutter and snake blinders
Front tow hook
front turn signals
rear turn signals
igniter/coil
gas pedal
fuel pump bracket
Rear cross member
Radiator
Gas tank
Photos of most of the stuff:
https://plus.google.com/photos/114497981799002421161/albums/5841340386570020513
Been hard at work but wanted to post a big list and give an update. I thought the truck was going to pasture, but fellow Mudder Pacer kept it alive. He's doing a great diesel conversion on his truck, and figured that my frame might be a good place to mock it up in. So here's a list of stuff that's available. If you have at one point asked for something on this list and I either didn't reply or said someone else was taking it, just let me know and I'll give you dibs. I had some sales fall through over the last few weeks. Everything is avaliable for local pick up, but i've listed below the stuff i would be willing to ship. PM if you're interested in anything. As stuff sells, i'll double back to strike through the post. If you don't see it on here, feel free to ask for it. Payment is cash or paypal for local pickup, paypal for shipped.
local pick up:
fj62 long block 3FE - $300 - engine ran and cranked before I started having troubles with fuel lines and suspension. No major oil leaks. Priced to move becuase I need this gone so pacer can mock up his diesel install.
Catalytic convertors - $70.00 a piece, $120 if you take both
any section of flooring - good floor great for patch panels - PM me about price if you need something
Seats - good shape, no tears, head rests included
Front seats - $150 a piece - had two sellers fall through so if you asked me for this early on just
remind me and i'll give you dibs.
Rear Bench upper - $100
Rear Bench Lower - $75
Hood - $50 - red, one small dent in the front, all hardware included, no rust issues, fireproofing is missing.
Rear Bumper - $40 - Chrome is nice but it's dented...you'll pass inspection in PA
Frame - $600 - minimal rust, minor issues around bumpers. PM and we can talk. can throw in axles as well
Cargo Glass - $20 a side
Steering column - $200
Center and front carpeting - it's not pretty, but there are no tears. $75 for the center, $100 for the front, $150 if you take em both. I might consider shipping these.
Roof - I can cut it off - $150
Stuff I'll ship or you can pick up locally:
Fuel Filler Neck - $50 - no issues
Alternator - $70 - was working good when I pulled it out
Glove box grab handle - $40 - lookin
Mass Airflow Sensor - $175
Brake booster - $100
AC Compressor - $80
ECU - $100
Rear View Mirror - $20 - lets you see behind you
Grab Handles - $10 each
Glove Box Door - $20 - looks good
Radio - $30 - This powers on but has stopped working - if you want to tinker with it's yours. If you pick something up i'll throw it in free
Rear Seat belt lap belt - $25
Rear Seat Belt Shoulder Harness - $80 a side/$140 for both
Grill - $70 -
Man a fre knuckle bearing kit - see here: https://forum.ih8mud.com/sale-parts/696666-pa-man-fre-knuckle-bearing-kit-w-wheel-bearings.html Was gonna do this install but I didn't, you'll save about $50 bucks of a quality set from Man A Fre
Rear Speakers with metal covers - $50 a side, $80 for both
Things that are gone:
doors
transmission
power steering pump
tail gate
02 sensors
front seat belts
side view mirrors
AC amplifier
rims will go on ebay
all chrome trim around windows, rain gutter and snake blinders
Front tow hook
front turn signals
rear turn signals
igniter/coil
gas pedal
fuel pump bracket
Rear cross member
Radiator
Gas tank
Photos of most of the stuff:
https://plus.google.com/photos/114497981799002421161/albums/5841340386570020513
Last edited:
- Thread starter
- #63
and just for fun...
some pictures of what's left.
some pictures of what's left.
rear quarters
you have a PM
you have a PM
Still have the filler neck? Do you know if it fits the FJ60?
PM sent
