Parting out 92 FJ80 Chicago, IL

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Nov 19, 2011
Threads
3
Messages
9
Location
Windy City, USA
Location
United States
Parting out 92 FJ80, Rear and right side body damage on exterior.

https://forum.ih8mud.com/80-series-tech/684463-value-wrecked-80-series.html

168k on engine and trans. just did compression check while chasing an intermittent rough running condition. 160-170psi all cylinders.

Transmission works great, transfer case has typical light clunk on/off throttle.

Front and rear axles are ok, birfields have light chatter, rotors and wheel bearings have less than 1000 miles on them. Calipers are both rebuilt.

New bushings in panhard rod.

New ends on steering link

Like new Rancho steering stabilizer.

Cruise control was not working but I believe it was the speed sensor at the trans and not the actuator. Actuator passed tests at the connector for resistance and motor movement.

A/c was still ice cold so compressor is good.

Radiator and trans cooler in good shape.

Driver's seat cover is worn on side other seats are Very good.

Interior panels are nice but not perfect. Carpet is excellent throughout, headliner is decent.

Radio was on it's way out.

Steering wheel is very nice.

Have all the glass except passenger cargo slider.


I'm giving it about two weeks for people to pick at it and take what they want then it's off to the big recycler in the sky to make a new land cruiser out of. I drove it home from the accident, it still drives true down the road.

Contact Info: Email preferred, Texts OK, PM's might not get recieved because of my inbox size. I'm reasonable, Local pickup preferred on items that can't be shipped UPS or USPS.

Brian Cotten
b.cotten@sbcglobal.net

Lockport, IL

630-391-1559
 
Pm sent on battery box
 
Backing plates have succumbed to rust, I'd rather sell the axle as an assembly or at least knuckle out packages.

However if I don't have any interest in the assembly over the weekend I'll pull it down to components, no problem.
 
It's got the 3FE right?

If so, I'm looking for the head and everything related to an EFI swap for my 2F. Shipping costs to 85283 please!:bounce:
 
Sorry everyone looking for parts, I'm trying to figure out how to close this ad.

Took a sawzall to the damaged sheet metal and there is less damage than I thought. Probably fit a Tacoma bed to it.

Thanks
 
Back
Top Bottom