Parting out '83 FJ60 Doo Doo brown in and out!

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

do you still have the power steering pump setup?
I need the pump, the bracket to the head, and maybe the lines with cooler loop to the steering box.
I do not need the steering box.

price and approx shipping to 59923 thank you

Yes, I do still have them. I dont mind selling the box and the rest seperate. I would like to get $150 + shipping for the parts you asked for.
march07023.jpg


cruise control still available?, please send me a PM if it is.........what condition is the motor in?

Lou
Cruise is still here. I took some pictures of how it is attached as several wanted to know this b/f purchasing.
march07042.jpg

march07025.jpg

march07027.jpg

march07028.jpg

march07029.jpg

I hope these pictures make sense, if not let me know and I will do my best to explain. I ask asking $100 + shipping for the CC.

Do you still have the panels that cover the jack compartment in the cargo area? And if so could you send me a picture and a price?
All of the rear panels are there. I might be wrong, but from looking at this truck compared to my fj62, the ack was under the seat, not in the rear cargo area??
let me know and I can post up some pictures.

How much for the door panels and dash shipped to 05461? Just out of curiosity drivers rear door and passenger front door. Shipped to 05461.

The door panels $40 each. and Dash pad is $60, (Is this what you needed?) I will have to check shipping, I should be able to ship the panels and dash FedEx or UPS.

The doors shipping will be the issue. $250 + shipping for both of those doors.

I have also had ?'s about the passanger doors, here are the pics of those.
I will take $100 each for the passanger doors.
march07032.jpg

march07033.jpg

march07034.jpg

march07035.jpg

march07036.jpg

march07037.jpg

march07038.jpg


let me know and I can get more detailed quotes for shipping.

Is the steering box available?

Yes the box is still there. $75 + shipping.
march07024.jpg


I need the clutch pedal bucket, where the clutch pedal attaches.

thanks,
-Al

Al,
I do still have that. Does that come seperate or is it part of all 3 pedals? I was considering going manual in my 62 but changed my mind. (Too many proects too little $)

i'm looking for a lock and cylinder set up for the rear liftgate
I am trying to keep that together for now. Might change my mind in a month?
 
I think its unbolts from the side and the clutch bucket is separate from the other 2 because you need to remove to add it to the 62 one.
 
I will have to make sure it will unbolt, I take your word for it. I was watching the thread in the 60 section about swaping over the manual but decided against it after much thought. (I do want to see someone with a 60/62 bolt up a sm465 to 203 to LC TC.)

Anyway, back on track....PM me an offer on the clutch pedal, I dont know how much to ask.

Also,

Please start making offers on stuff....I will start pulling this apart and listing individual parts in the parts for sale section SOON!

If that doesnt go too well I will be putting some of it on eBay. So make some offers I have to fund a few other projects with the parting out of this so I need to get some other items moving.
 
panels in cargo compartment

I am missing 2 panels that fit just aft of the left wheel well on the inside of the cargo compartment. At least it looks like 2 panels from the parts catalogue. I don't know if this was the original place to put a jack or not. I do know the rear windshield washer resevoir is in there.

There appears to have been a recessed knob or something that held them in place.

Could you send pics of the aft area behind the left rear wheel well.

Thanks
 
On the 83 there is a knob/cover for the rear washer. However on my 89 62 it has a seperate panel that removes to access the jack and tools and also has a spot for the washer somewhere.

Here are some pics of the 83. They shoudl clean up well.
Picture053.jpg

Picture026.jpg
 
I pm'd you the other day. Any update on the parts I was looking for? Thanks.
 
I pm'd you the other day. Any update on the parts I was looking for? Thanks.
YGPM, I will check when I go back over to look at it in a few days.

Any word on the clutch stuff?

Thanks,
-Al

Al,
Everythign shoudl be there. I will make sure when I go back over there in a few days. I will try to get a few pics and if its what you need then we can work out details.
 
Do you have the grab handle on the dash over the glove box? If so, I am very interested! Could you send me a picture?

Thanks,
Dan
 
YGPM, I will check when I go back over to look at it in a few days.



Al,
Everythign shoudl be there. I will make sure when I go back over there in a few days. I will try to get a few pics and if its what you need then we can work out details.

Very Awesome, you are the man:beer:
 
Do you have the grab handle on the dash over the glove box? If so, I am very interested! Could you send me a picture?

Thanks,
Dan

Dan,

I will check when I go out there and take a few pics for ya.

rear axle on the long side.can ya part:beer: thanks

Rear axle is staying together and I might be keeping it myself for a project.
 
Still got the Radiator? willing to ship it to 30750?

Thanks
Brian
 
Grab handle isnt there. I think that only came on Aus 60's.

I am heading over to the 60 this weekend. Sorry for any delay, just been busy.
 
No Rush man, just let me know when ya got the parts ready....
 
Kids were sick this weekend. I am heading over there tonight or tomm to pull the steering box (sold) and take some pics.

If anyone needs anythign else let me know so I can take some pics for you.
 
I'm interested in a driver's side seat belt, sun visors and front door panels. They'd need to be shipping to 83714. I saw your price for the door panels, but if you could let me know the condition/price of the visors and seat belt I'd appreciate it.

Thanks,

Ray
 
Is the steering shaft from the firewall to the box going with the box? If you read the 60s forum you know my problem so long story short i really need one ASAP.

-Matt
 

Users who are viewing this thread

Back
Top Bottom