Parting out '83 FJ60 Doo Doo brown in and out!

[89s rule]

I have a '83 FJ60 it is Doo Doo brown in and out.

Make me an offer...wife wants it out of the garage

I will update the list of available parts and I can post (or email) pics of anything you need.

Already gone:
1. Fenders
2. Tranny
3. Transfer Case
4. adjustable vents
5. radiator
6. front grill and lights
7. side marker lights
8. drivers side tail light
9. rear side emblems
10. F & R driveshafts
11. Engine side cover
12. Front Axle
13. Side mirrors
14. Front Seats
15. Steering Box

Notable items still available: (And since I have to post a price.)
1. Cruise Control (Looks to be a factory install not a dealer add on.) - $100
2. All doors (Very little rust.) - See post below for Drivers side pics.
3. (4) 30x9.5 Michelin LTX (50%+ tread) on stock fj60 chrome rims (rims have rust, might get most of it out with some steel wool?) $200 for the set SOLD!!!
4. Clutch and pressure plate and flywheel all seem to have some use left in them. (Make an offer)
5. Power steering

Much of the interior is in decent condition.

I obviously cannot list everything here so if you need something post or send me a PM and I will get back with you ASAP.

 

[Sputnik40]

Figured the UC folk would have picked you clean...

Could you hold the engine oil cooler. I had one sold off the 85 FJ60 I had but something unfortunate happened to it. I want to contact the guy and see if he still needs it - long story.

 

[LakeNorman_FJ40]

Only interested in the wheels...willing to separate? Cost? Also want the spare wheel too. Really hate my wagon wheels...

 

[90FJ62]

How much for the parts needed to covert 62 front end to the 60 front end?

 

[TyWebb]

I'm interested in the front seats and the cargo area carpet. What condition and how much are you asking?

 

[toyman317]

How good a shape is the rear lower tail gate? Price shipped to 46220? If you have the cupholder, what is the condition/price? Also need driver rear bump stop. Thanks.

 

[89s rule]

Figured the UC folk would have picked you clean...

Could you hold the engine oil cooler. I had one sold off the 85 FJ60 I had but something unfortunate happened to it. I want to contact the guy and see if he still needs it - long story.

I will check on this tommorow I didnt have time to get out there to make sure I still have it.

Only interested in the wheels...willing to separate? Cost? Also want the spare wheel too. Really hate my wagon wheels...

At this point I would prefer to sell them as a set. By the time I dismount, etc. But make me an offer on just the rims and maybe we can work something out. PM me your email and I can send you pictures. (They look alot worse in pics than they really are.)

How much for the parts needed to covert 62 front end to the 60 front end?

Sorry, I guess I was not clear enough as for "things already gone" #6means the entire front end except the radiator support is gone.

I'm interested in the front seats and the cargo area carpet. What condition and how much are you asking?

- Front passanger seat is decent...it has one burn hole in the bottom. Drivers seat is toast. Frames seem to be in great shape. Headrests are almost perfect. $100 for both.

- Rear carpet seems to be complete but does have stains. (Spare parts are back there so I cannot see all of it.) Let me know and I will pull everythign out and look at it closer and give you a price and pics.
- Rear hatch carpet is in good shape if you need that.

How good a shape is the rear lower tail gate? Price shipped to 46220? If you have the cupholder, what is the condition/price? Also need driver rear bump stop. Thanks.

- Rear lower tailgate has rust. but it seems to be in one place, should not be a hard repair. There is a little tiny bit of bubbling on the insude under the other hinge as well.

- Cupholder - isnt that part of the console? I would prefer to keep that together. $75
- Drivers side rear bumpstop - looks to be in fine shape, I havent pulled it off yet though. $5


All prices listed are +shipping my zip is 29639.

 

[joefj]

any rear springs?

 

[89s rule]

any rear springs?

Yes, they are rather rusty. I can get pics if you would like. I also have the springs from my 62, but the rears had broken leaves (they were the short ones).

Let em know and I can get pics of either. How soon do you need them? Because I have a rollng almost complete truck now. I would like to be able to part it out in stages, but can work something out if you need it sooner.

I have a local guy who seems to be interested in the axles for his Suzuki, but no $ yet.

 

[bigbertha]

HI-

Got any pics of the two DS doors? Are they complete? How much for the pair shipped to NY 14867? Also looking for a front emblem TOYOTA.

Thanks!

 

[jnuke1]

What is the condition of the dash and how much for just one seat frame if they are not sold allready.

 

[89s rule]

HI-

Got any pics of the two DS doors? Are they complete? How much for the pair shipped to NY 14867? Also looking for a front emblem TOYOTA.

Thanks!

I will get pics today of both doors. I dont have any front grill or related parts.

What is the condition of the dash and how much for just one seat frame if they are not sold allready.

Dash looked ok maybe a few very minor cracks (I will look at it closer today) Which seat are you interested in?

 

[89s rule]

Cruise control: ($100)

Control Box:

 

[89s rule]

Instrument Panel and various switches:

Sorry the column cover was up, I put it back on now.

 

[mookie]

front driveshaft

hey, i need a cv joint front driveshaft if you still have it

thanks
Neal

 

[jnuke1]

Dash looked ok maybe a few very minor cracks (I will look at it closer today) Which seat are you interested in?[/QUOTE]

I need just the rails that attach to the floor so i think either side will work but it is for the passenger side.

 

[n2666s]

need an exhaust manifold to fit my 78 pig ...mine is cracked/rusted and non repairable do you have one that will fit?, is the C.Control still available?, could use it on the wife's fj60......shipping to Alabama 35406

Lou

 

[89s rule]

All prices listed do no tinclude shipping. Also if you dont like the price feel free to make an offer. I am trying to usually do 50% off of cruiserparts.net

HI-
Got any pics of the two DS doors? Are they complete? How much for the pair shipped to NY 14867? Also looking for a front emblem TOYOTA.

Thanks!

Front driver side door: fixable rust on the bottom inside seam. $100

rear door (rust free): $150

Prices listed do not include door panels or shipping. If you know of where I can ship them I will do it, but I bet it wont be cheap. Greyhound might be our best bet b/c I dont know where a forwardair loaction is close to me?

What is the condition of the dash and how much for just one seat frame if they are not sold allready.

Dash looks great but it does have 3 cracks if you count the speaker cracks as 1. 2 are right at the cluster lump. $60

Figured the UC folk would have picked you clean...

Could you hold the engine oil cooler. I had one sold off the 85 FJ60 I had but something unfortunate happened to it. I want to contact the guy and see if he still needs it - long story.

Let me know on the oil cooler, I checked tonight and its there. I havent pulled it though to make sure its not rusty. (It doesnt look it from the top.) Let me know if I need to. $50

I'm interested in the front seats and the cargo area carpet. What condition and how much are you asking?

Here is a picture of the carpet, its in rather bad shape. Stained and has one hole/tear in it. Alot better than nothing. $15

I would prefer to sell the seats complete. I sat in them tonight and they still work fine and even feel good for a 24 yr old vehicle.

hey, i need a cv joint front driveshaft if you still have it
thanks
Neal

Neal, Sorry no driveshafts, wish I had them b/c I have had several requests.

 

[89s rule]

need an exhaust manifold to fit my 78 pig ...mine is cracked/rusted and non repairable do you have one that will fit?, is the C.Control still available?, could use it on the wife's fj60......shipping to Alabama 35406

Lou

I was able to do a little research and found this:
http://www.sor.com/sor/cat044.tam?xax=5292&page.ctx=cat044.tam
According to SOR they are the same.

$80 + shipping. Shipping should be under $40, if it is more then I will cover it. $120 total. Let me know and I can pull it off for you. (I have the intake manifold as well.)

I do still have the cruise control, a good bit or intrest, but no $ yet. I have some pics of how it hooks up as well, it seems real simple.

 

[apeterson]

what do you need for the side cover