For Sale Parting out 72 pig

[missrenaissance]

Location

United States

I'm parting out BacoBits my parts rig. I mostly needed the rear seat and some dash items, heater, grill, and radiator. The body is pretty rough (not really usable for patch or body panels anywhere. The drivetrain is still there and works, 3 speed transmission and 1F engine. I drove it before I started to pull parts (again, body is pretty bad, it wasn't worth saving the Pig for).

The pig is located in the Santa Cruz California area. Let me know what parts you need. I can send you pics to give you an idea of condition. I'm sending it to the scrap yard in 3 or 4 weeks after I pull the last of the parts I need.

 

[abqcruiser]

I'm looking for both rear corners as outlined in the attached image. It doesn't matter if the bottoms are rusted out. If you are willing to cut them out , can you send me some pics?

Thanks, Mark



https://forum.ih8mud.com/attachments/img_0028-jpg.1130735/

 

[montyorpenn]

I'll take the tailgate handle & brake booster check valve with O ring gasket.

Thanks,
Monty

 

[jeepstermog]

I NEED THE REAR LIGHT COVERS/LENS COVERS

 

[LAMBCRUSHER]

right front frame horn with the vin # cut , and the body vin tag? Has it got fenders?

 

[jeepstermog]

right front frame horn with the vin # cut , and the body vin tag? Has it got fenders?

it is a 1972 55 yes it has fenders. what i need is the rear lights just the covers, but if you want to sale the lights as a package i still want them. i also need all of the marker lights

 

[Gordobe]

Is there a rear bumper?

 

[Walkerm916]

I need the screws that secure the mirrors to the doors.


Sent from my iPhone

 

[Walkerm916]

Do you have any of the components for the tailgate? i.e. The regulator and fears that push the rear window up and down? And what condition are they in if so.


Sent from my iPhone

 

[abqcruiser]

Walkerm916, Mcmaster Carr carries ss screws for the mirrors. I had to buy a pack of 25. Send me a pm with your address and I'll mail you 4 of them.

 

[LAMBCRUSHER]

right front frame horn with the vin # cut , and the body vin tag? Has it got fenders?

bump?

 

[jeepstermog]

there are 2 # first one is #model# FJ55LG 2ND is frame # FJ55-25885

 

[LAMBCRUSHER]

there are 2 # first one is #model# FJ55LG 2ND is frame # FJ55-25885

I am confused- are you the responsible party for the pig headlining in this thread, or??? I was asking the seller...and I am not the seller, in case you're confused too...HTH

 

[jeepstermog]

my bad

 

[LAMBCRUSHER]

no worries- I wasn't sure what was going on. thought maybe it was your pig in question and i was confused as to whom I should be talking to...carry on.

 

[missrenaissance]

Window regulators front and rear?

How bad are the doors?

I can make a drive over that way to grab them next weekend. I can also help get parts into Sacto area if needed.

Doors are so-so. I'll sang some pictures. What part of the window regulators do you need? I'm not sure if you mean the levers or the internal mechanisms...

 

[missrenaissance]

I'm looking for both rear corners as outlined in the attached image. It doesn't matter if the bottoms are rusted out. If you are willing to cut them out , can you send me some pics?

Thanks, Mark



https://forum.ih8mud.com/attachments/img_0028-jpg.1130735/

Mark, I'll get some pics today of the corners.

 

[missrenaissance]

Is there a rear bumper?

I have a rear bumper, bit it's just the center section, no corner pieces.

 

[MoabFJ]

How are the speedo and lower dash pad strip? Any interior pics?
I could meet you in SC for those.