Parting out 1991 Rust free 80 with ARB Winch Bumper

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

arcteryx

Supporting Vendor
Joined
Sep 27, 2004
Threads
1,062
Messages
8,054
Location
Austin
Website
www.cruiseryard.com
Best way to contact me is email- jason at cruiseryard {dot} com and specify the year and part you want

I added another one to my stable, so if you dont see something on this rig, I may have it on another.

This is a maroon with tan port leather that was in a fender bender. It has a ARB winch bar that I am selling (SOLD). It's a Texas rig so has little to no rust. Engine has 235K. I have started/driven it.I have the full set of leather seats, which are in good condition for the year.

Pics are here and below 1991WreckedARB - a set on Flickr


The battery tray and CDL switch are sold, but everything else is available.

Some parts are below-
ARB Winch bumper - SOLD
Front drive shaft
Rear drive shaft
Master Cylinder
Brake booster
seatbelts
Headlight
Turn signals Front (below HL)
Parking/Corner lights signal, next to HL
PS Rear taillight
AC Compressor with clutch
Center Console
Center Console cup holder, DS
Driver pedal covers
Antenna motor
Rear wiper assembly
DS Rear panel in cargo area, covers toolkit
Digital Clock Bezel
Front half of carpet, 1st and second row
Cargo carpet
Front Grill with Toyota
Front Seats
Hitch
Rear lower tailgate, comes with nice carpet panel
Rear upper tailgate - has a couple of dents on it that could be fixed, see pic. Comes with glass and emblems
headlight/turn signal switch (left side)
cruise/wiper switch (right side)
center dome light
starter
ECT switch
Rear Defroster switch
Rear Heater switch
Antenna switch
Hazard switch
Dash light dimmer switch
Mirror Adjustment switch
Tool bag
Rear Heater
Brackets for 3rd Row seats, these attach to the wheel wells
ABS Speed Sensor, DS and PS available
Ashtray
Fuse cover, below dimmer, black in color
Speedometer Sensor, part 83181-20040
Heat and AC controller
Rear Heater hoses, hard lines, set of 2 (Specter Off-Road Land Cruiser Parts - Page 188 Land Cruiser Heater)
Air Flow Sensor
Transmission cooler
Hood Gas Struts
Rear Door lock actuator
Front Door lock actuator, comes with lock assembly and electrical connections, cant separate
Gas struts for hood
Radiator
Fan shroud
Windshield Wiper Reservoir with motor
AC Dryer
Evaporator
Condensor
Hi pressure line (compressor to evaporator)
Low pressure line (compressor to condensor)
Alternator
Front Flares
Rear Door flares
Rear quarter flares
Valance
Front 3rd member only
Hood
fender
Muffler
Cat
tail pipe (goes over rear axle)




 
Last edited:
how much for the bumper?
 
I would love the front seats if you were in California. Argh
 
thanks matt, yes, the bumper is $500. tucker74 posted that he got his straightened for $150.

As far as the seats, I can ship them :) The last set I sold went to Cali as a matter of fact. n
 
arcteryx said:
thanks matt, yes, the bumper is $500. tucker74 posted that he got his straightened for $150.

As far as the seats, I can ship them :) The last set I sold went to Cali as a matter of fact. n

How mich would it be to ship to 94122? Thx
 
doees it have the original fan clutch (aqua/green hub) if so id like to take it off your hands how much $$$$

shipping to 85044
 
doees it have the original fan clutch (aqua/green hub) if so id like to take it off your hands how much $$$$

shipping to 85044

i should mentioned its for my 89 62 LC however i need the FJ80 with the 3FE GREEN/Aquafan clutch
 
I am not going to part out the engine since it's running; it will be sold as a whole. thanks for your interest
 
Oak interior? I need an Oak Front DS seat belt.

Also is the clam shell around the column the same from 91-94? If so can I get a picture and a price?

Thanks!!
 
ARB is sold
 
Is the starter oem?
 
Do you have a set of working side mirrors for an 80? I prefer the chrome ones, but if you have none, please let me know how much shipped to 90004? Thanks!
 
im looking for engine wiring harness, all that is under the hood. the mass airflow meter, the intake hoses and the vsv for the charcoal canister. thanks
 
will the PS tail light fit an FZJ80? If so pm me with price to ship to 30307
 
yes, all the 80 series lights are interchangeable. however, I am sold out at the moment.
 

Users who are viewing this thread

Back
Top Bottom