Parting 94 body & interior

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Sep 23, 2003
Threads
15
Messages
82
The rest to be hauled off on Saturday - get your orders in!!!

I have a green '94 80 series and am parting out the entire body and interior. It has close to 200K so don't expect the paint to be pristine. I will be keeping the frame, drivetrain, steering and suspension for another project. Here is a list of the bigger parts, but ask if you have any requests.

In Phoenix

Body - most is pretty rough, but this is the good stuff:
driver fender - soldRear passenger door - $50
Grill - Sold
Passenger side mirror - $50
Driver's side headlight assembly - Sold
Driver corner light - $15
Driver blinker - $15
Roof rack cross bars - $20 each
Door handles (no drivers)- $10 each
all glass available
Have the battery hold down, but the corner of the fiberglass is cracked and only 1 j-hook. (I can email a pic) - $25


Interior (grey) :
Factory radio/cd/cassette - stereo and cd work (not cassette) - $40
Dome lights - sold
Tons of other stuff - just ask!
 
Last edited:
I need the driver fender. Is it straight and have the flare attached?

I also need the clam shell trim that goes around the steering column (black)

Paint code 6M1? Where are you located?

Thanks, Eric
 
Driver fender is straight - only damage is one of the flare mounting studs pulled halfway through. It would be covered by the flare, so easily fixed. Paint code 6M1. No flare.

In phoenix
DSCN1605.webp
 
I need a few things....These are for a grey interior landcruiser.

First, do you have an interior dome light?
Second, do you have the little handles that you would grab to adjust the seat (the little handle on the left side of the seat that you pull up so that the back of the seat will sit more errect.) I need the left and the right one.
Third, does your cruiser have the center console that has the extra compartment ontop of it?

How much for all or any of these parts.

Thanks,
Chans
 
Outside DS Door handle - you can keep the lock cylinder.

How much?
 
I need the following in bluish gray: all 4 inside door handle bezels(plastic trim around interior handle), right side leather arm rest with no cracks. Other stuff: rear floor step plates for third row, one dome light, factory jack and extension rods, and the steering column cover in good shape. Shipped to 92314. Thanks.
 
PM sent
 
I need a few things....These are for a grey interior landcruiser.

First, do you have an interior dome light?
Second, do you have the little handles that you would grab to adjust the seat (the little handle on the left side of the seat that you pull up so that the back of the seat will sit more errect.) I need the left and the right one.
Third, does your cruiser have the center console that has the extra compartment ontop of it?

How much for all or any of these parts.

Thanks,
Chans
The interior is grey. I have the dome light and center console with the padded armrest compartment. Armrest top is grey leather. No luck on the seat adjusters - has power seats.

If you are just wanting to replace your current console lid I could carefully take off the top section - it would cut shipping cost.

PM me with zip code.
 
Crash

Did you get my pm?

D
 
How good is the carpet?
Front section of carpet looks pretty good, only a few spots, no visible wear. Cargo section is probably worse - hard to tell right now.

PM email - I will send pics.
 
PM's sent on all requests
 
PM Sent
 
The tailgate is not that great. The top edge (under the top gate when closed) has some bends in it, the center has a wide scrape and dent (see picture) and there are a few other scratches.
DSCN1626.webp
 
I would like the dash piece that fits around the stereo and instrument panel. Also the console piece that fits around the shifters. 98604
 
I want the grille and lower valance (houses the front turn singals)
how much to ship to 36832?
 

Users who are viewing this thread

Back
Top Bottom