Parting '85 FJ60 Colorado

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Mar 12, 2005
Threads
287
Messages
3,074
Location
Littleton, Colorado
What do you need?

Both axles remain - hoping to sell complete - sold
Both front fenders and inner fenders in great condition, no dents/rust. - $70 each
4spd tranny and transfer case - sold
Practically brand new radiator - sold
A/C condenser
Alternator - $40
Coil/igniter - sold
Distributor -sold
Brown interior - seat belts - fronts sold - rears available
Passenger seat is very good - dark brown vinyl with light brown/yellow striped fabric - Sold
passenger side rear turn signal housing - $15
rear hatch - sold
tailgate - sold
full wiring harness including fuse box
air pump - sold
air rail
smog stuff
carb - sold
instrument cluster - $25
switches-sold
rear seat covers - great condition - one tiny 1/2" tear in fabric - $50
steering wheel/column, with ignition/keys - $50
master cylinder/brake booster - $60
front brake lines - $35
2F engine - turns over but needs a re-build-sold
all glass except windshield is good
catalytic converter-sold
title/vins
Rear doors complete - no rust - $50 each
valance - sold
wheels/tires - sold
rear bumper - no dings/dents - chrome good - sold
headliner - no tears great shape - sold
dark grey/blue carpet - rear cargo area to top of rear seat - very good - $50
center console - great condition except for one small hole on inside corner. Outside is very good condition. - $25
gas tank -sold
fan shroud - $15
fan/fan clutch - $25
hood release cable - sold
relays-sold
smog computer -sold
License light assembly - excellent shape - sold
skid plate - sold
Prices do not include shipping


lots of other stuff.
 
Last edited:
What color interior/exterior?
Looking for good...rust free lower tailgate also front and rear (gray) carpet in Very good condition.
 
Locking Hubs

I'll take the front locking hubs. Are they Aisin?
I'm in Colorado so shipping should be cheap. PM me......
 
In2Cruisers - sorry, the tailgate has some rust and the carpet is brown.

Veggie80 - they are Aisin hubs - I was kinda hoping to sell the axle as a whole - would like to wait for just a bit to see if there's any takers - then will consider parting out the hubs.

Cruzerman - do have the front valance - actually have 2 - one with the headlight washers (including all the hoses, reservoir, pump), one without. Both of them have minor, minor dents which could easily be straightened.
Thanks
 
Do you have any emissions components? I need a HIC valve (the brass and plastic one that sits in the air filter housing).

TIA-
 
I need the pulley from the A/C compressor, not the whole compressor.
 
Looking for the Radiator? Willing to ship to 30750?

Thanks
Brian
 
Front grille? What shape is it in? Shipping to 05461
 
max, i want the front interior door panels :cool:
and the rear cargo panels( if they're not cut up)
 
got a right side rocker panel trim? how about the brown plastic door threshhold piece that screws to the top of the right front rocker panel? my right rocker and door got smooshed and need to replace these small minor items.

Also, how are the inner/outer wheel wells on both sides and the right quarter panel near the tail light?
 
Hi - Don't have the rocker trim - I'll check on the brown plastic threshold piece after work.
Do have both front fenders and inner fenders, both in excellent condition. The right quarter does have some rust, but it's not terrible.
Rob
got a right side rocker panel trim? how about the brown plastic door threshhold piece that screws to the top of the right front rocker panel? my right rocker and door got smooshed and need to replace these small minor items.

Also, how are the inner/outer wheel wells on both sides and the right quarter panel near the tail light?
 
Got a complete choke cable assembly? If so How
much do you want for it plus shipping?

thx

JimK
 

Users who are viewing this thread

Back
Top Bottom