Rob Ridgeway.. Need a part # of your rear springs please to help Casey Campbell with his instal. His rears appear tooo short.. Thank you and carry on..
Parabolic help
- Thread starter tornadoalleycruiser
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
will see if there is a number on them tommarow and call you
They are correct
emailed Paul... I have the correct ones, mounted correctly... wonders never cease! going to install anti-reverse shackles to solve the issue.
thanks EC and Rob (hope the bus will be better soon)
emailed Paul... I have the correct ones, mounted correctly... wonders never cease! going to install anti-reverse shackles to solve the issue.
thanks EC and Rob (hope the bus will be better soon)
- Thread starter
- #4
Did you put weight slowly on the rear axle and try a crow bar to help move it into position yet? Don't put all the weight if it's "inverted" just slowly add weight while pulling down on the shackle and see if it will go to normal position.. Should work after it settles.. I got the #'s in the truck from ROb.. Only difference was one # on the rears.
EC,
messed with for a couple of hours on Saturday... was able to get it back, but it just doesn't want to stay put.
ordered anti-inversion shackles from COTT, they s/b here by Friday.
the leak on the engine looks to me to be pan related. Received the gasket last week, will get to that maybe on Sunday...
Thanks!
Casey
messed with for a couple of hours on Saturday... was able to get it back, but it just doesn't want to stay put.
ordered anti-inversion shackles from COTT, they s/b here by Friday.
the leak on the engine looks to me to be pan related. Received the gasket last week, will get to that maybe on Sunday...
Thanks!
Casey