P0340 I screwed up

[Dzrtcrzr]

so I was going through car wash the other day and my CE light along with normal others came on. I ran codes today and it came up as p0340 cam position sensor. I do some digging and come to find out when I was digging around under the hood checking timing belt on driver side I may have moved some wires (cps wires) close or into the serp belt. Question is how much of a PITA is it to change out and how necessary it is to change at the moment. The truck runs great still... Just throwing the code at me.

 

[Sandroad]

You may have dislodged the cps under the timing belt cover or unplugged the sensor connector. Retrace your steps and recheck the connector and positioning. It's a bit of a pain to completely R&R the sensor, so hopefully you don't have to do that. There are good descriptions of removing the LH timing belt cover (with photos) in the forum FAQs.

 

[Dzrtcrzr]

You may have dislodged the cps under the timing belt cover or unplugged the sensor connector. Retrace your steps and recheck the connector and positioning. It's a bit of a pain to completely R&R the sensor, so hopefully you don't have to do that. There are good descriptions of removing the LH timing belt cover (with photos) in the forum FAQs.

Thanks