Opinions on 100 series TJM lockers needed please

[Get outside]

Well, I wasn't really shopping for lockers but ratter snorkels but happened to stumble too what looks like very low prices compared to other competitors and of course it got me thinking!

Anyone here have them? What do you know about them (even if you don't have their brand)? Keep walking and avoid or worth a shot they are just not that big of a deal around our market?

Thanks in advance

 

[Get outside]

Bump bump bump
Bueller, Bueller, anyone?

 

[Jcrider48]

I have the TJM lockers. I had JT Parts install them. I've had them since the 1st of July.

I was going to get the ARB but Carl said they have a tendency to leak and the TJM were less.

I have use them on every trip since July with no issues other than the plastic air line busting from the heat and pressure combined. Carl send me new stainless steel lines for the front and back and had a shop install them for me on him dime.

Hope this helps.

 

[04gto]

I have the TJM pro locker installed in the front (OEM lockers in center and rear). With ARB CKMA12 compressor. Had it for about 6 weeks. Only used it three times so far. Works perfect. Had it installed by J&S Gear in Huntington Beach, Ca. I got my pro locker off ebay for under $600 BNIB from a SoCal seller. My first quote from 4WheelParts to have just the ARB locker (not the compressor) installed including just the locker and installation kit was like $1850. Even if I installed the compressor myself, I would have spent $2150 through 4WheelParts. I ended up getting the locker, compressor and everything installed for about $1550!

 

[04gto]

I have the TJM lockers. I had JT Parts install them. I've had them since the 1st of July.

I was going to get the ARB but Carl said they have a tendency to leak and the TJM were less.

I have use them on every trip since July with no issues other than the plastic air line busting from the heat and pressure combined. Carl send me new stainless steel lines for the front and back and had a shop install them for me on him dime.

Hope this helps.

Where is JT parts?

 

[Jcrider48]

Home Page - JustDifferentials.com

Washington state.

 

[04gto]

Home Page - JustDifferentials.com

Washington state.

Okay did not realize Just Differentials was AKA JT's. Thank you

 

[04gto]

I thought I would post this here since people will fin this thread when researching lockers.

I had read a long time ago that TJM lockers were made in Australia, but I wasn't sure if they still were. So I emailed them and asked this:
"Hello, I already own a TJM Pro Locker and I love it. Where are your Pro Lockers manufactured? Also is it true that this is the same design as a Mcnamara diff locker?"

This was the reply I got:
"Thanks very much for your comments!

All of our ProLockers are design and made in Australia by our Prolocker team. I have no idea about the design of Mcnamara diff locker, believe the function will be same but the design won’t be exactly same. Hope that I answer your question."

Edit: I also dug up this review a few months back:
ABSOLUTE TRACTION | Australian 4WD Action