Ok

[cruiseroutfit]

She has the tracking number too

Let me know if you need it again, I'd be happy to PM it over too you.

PS. I hope you find your voice soon!

 

[cruiser88]

She has the tracking number too

Let me know if you need it again, I'd be happy to PM it over too you.

PS. I hope you find your voice soon!

thanks Kurt.....ha the tracking # does not come up......i am sure she wrote the wrong one down

This is what i have seac-633074

 

[cruiseroutfit]

sea-633074

Tracking number
sea-633074

Pick up date
Mar 10, 2008

Estimated delivery
Mar 17, 2008

Shpr/rcpt info
View


Purchase order number
132426

Bill of lading number
XT6ZY1

Origin location
KENT, WA

Destination location
WEST CHESTER, OH

Service type
LTL Longhaul

Weight
315.0 lbs.

 

[cruiser88]

you da man

 

[cruiser88]

Just got my tie rod end kit,tabs and U-bolts

 

[trailyota]

Your allways welcome to wrench at my shop. I got a bay that 's open.

 

[cruiser88]

Your allways welcome to wrench at my shop. I got a bay that 's open.

I thought about you .


But its hard to get away with the baby...with the wonderful weather we have been having here i started today.

 

[cruiser88]

lift is in....... It only took 3 days working around the rain.















:whoops:Jim we need to wrap up this axle when you get time....i am hearing a noise when i go around a hard corner when leaning

 

[FJ40Jim]

Chris, that rear axle assembly is so F-ed up, maybe we should just swap a whole assembly out of one of these parts trucks.
That way the backing plates & p-brakes could be repaired, cleaned , painted, seals & bearings replaced.
Then we swap in the fresh housing, swap the diff in, hook it up & drive.

Still easy to do since you had the leaf springs loose yesterday.

 

[cruiser88]

Chris, that rear axle assembly is so F-ed up, maybe we should just swap a whole assembly out of one of these parts trucks.
That way the backing plates & p-brakes could be repaired, cleaned , painted, seals & bearings replaced.
Then we swap in the fresh housing, swap the diff in, hook it up & drive.

Still easy to do since you had the leaf springs loose yesterday.

You have time next month? i agree about the carrier. How much you want for the new carrier

 

[cruiser88]

Only real thing i will need your help with is the locker

 

[FJ40Jim]

You can have the rear housing assembly for scrap value ($.10/lb). They usually go to the crusher, cause there's not much demand. Worth more in scrap value than taking up floorspace in my tiny shop.

 

[cruiser88]

You can have the rear housing assembly for scrap value ($.10/lb). They usually go to the crusher, cause there's not much demand. Worth more in scrap value than taking up floorspace in my tiny shop.

So i will give you my old one.



Sounds good and thank you. Just let me know when cause this sucker is vibrating now, about a week before i will order the bearings/seals