For Sale [Nor Cal] 1972 FJ40

[reddingcruiser]

Location

United States

I am parting out this 1972 FJ40 that the PO has given up on (too many other toys). The tub, fenders and w/s frame are sold. Most of the sheet metal has been media blasted and is ready for paint.

The frame has a clean, non-oped title. It is in excellent condition and has been blasted and epoxy painted, and is set up for a shackle reversal. No Rust or rot. No dents on the front tub support brackets. Set up for saginaw p/s.

It is obviously set up for a spring-over. The front axle was completely rebuilt last year with disk brakes, large-pattern knuckles, new gaskets, seals, wheel bearings, new Warn hubs amd 4X4 Labs Frombe steering. The rear axle spring perches have not been welded in position (in case he went with a different (longer) transmission. The springs and shackles are 4" lift (new). If someone wants the frame and wants to go back with a stock F/2F, I have the frame mounts that were carefully removed.

4x4 Labs Frombe steering - $450
Frame w/title - SOLD
4" Lift Srpings - unused - $400
Rear axle - SOLD
SBC - SOLD
SM420/transfer case/bellhousing, flywheel and clutch - $500
Aluminum Wheels - $200


One-piece hood - SOLD
Aprons - SOLD.
Bib - SOLD
Bezel - SOLD
Rear Barn doors w/hardware - SOLD
Custom Full Cage - SOLD
Metal half-doors - SOLD
Extra SM465 - $100

Lots of small parts I'll list later, or ask.

 

[batcon]

I'm interested in the cage. Do you have any pics?

 

[jbsmith54]

can you post pics of the metal half doors? and quote shipping to 29650

 

[reddingcruiser]

I'm interested in the cage. Do you have any pics?

Haven't hauled it home yet but send me an email address and I'll send pics as soon as I can.

 

[reddingcruiser]

can you post pics of the metal half doors? and quote shipping to 29650

I'll post pics by Sunday, and I'll send you a PM with shipping.

 

[batcon]

email sent

 

[reddingcruiser]

Hood sold.

 

[reddingcruiser]

Home pc died, more pics hopefully by Tuesday. Tapping on a iphone sucks.

 

[reddingcruiser]

Here are some pics of the half doors and rear barn doors. All are bare metal (with paint shop dust!)

 

[King Kong]

Email sent about roll cage......

 

[G Man]

I'll take the half doors and the back saloon doors. I'm in Orange County (CA - 92886).

 

[G Man]

Are the half doors and saloon doors straight?

 

[G Man]

Sorry. Also, in the middle of a disc brake conversion and found out my hubs ('72) are not stock so the Man-a-Fre conversion doesn't fit. Will you sell the front hubs? I don't need the hub covers or washers or bearings.

 

[reddingcruiser]

Decided to keep the front axle to build full-floating disk brake rear axle. 4X4 Labs Frombe steering set-up still available.

 

[reddingcruiser]

Half doors, rear doors, hood, windshield and roll cage sold.

Frame, springs, rear axle still available

 

[binderbeast]

pm sent on frame.

 

[OyajiJon]

What brand springs/shackles are they? Thanks

 

[reddingcruiser]

What brand springs/shackles are they? Thanks

I haven't been able to identify either. The springs are 5 leaf rears and 6 leaf fronts. Shackles are commercially made, heavy duty. The PO does not remember where he bought them.

 

[GBA cruiser]

I'm looking for a fuel seperator for a 72 fj40 do you have this part? It's behind the passenger seat under the metal cover on mine. With three hoses connected to the bottom

 

[flaa1a]

I'm looking for a fuel seperator for a 72 fj40 do you have this part? It's behind the passenger seat under the metal cover on mine. With three hoses connected to the bottom

You may already know this....but you can run that set up with out that thing in your seat.