Nitro Upper Control Arm Not Compatible with LC with AHC?

[llfarms]

I seem to have a problem. I brought UCA Nitros with me from the US and realized as I was replacing all the sway bar bushings that for many Hundys that the lack of the bracket on the arm for the brakes is also used for the AHC which cannot be zip tied to the bracket as per the gents at Just Diff.

http://www.justdifferentials.com/JTOUCA-TLC100-p/jtouca-tlc100-bj.htm

I cant seem to find a bracket or part number to weld on so that the AHC wont flip out.

I have to admit that Im perplexed in how to proceed as I had high expectations.

It doesnt have the bracket mount like the Light Racing.
http://www.justdifferentials.com/JTOUCA-TLC200-p/jtouca-tlc200.htm

 

[varythings]

Can you just cut the bracket off the old UCA and weld it onto the Nitro? There is plenty of adjustment and articulation in the AHC sensor arm, you wouldn't have to get it in the exact same spot. I just installed those UCA's along with the Icon Stage III, they're a quality piece of kit. Good luck.