Need M416 Parts Source

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Dec 11, 2006
Threads
1
Messages
3
Location
Redondo Beach, CA
Website
www.sequoia4x4.com
Specifically I need the following parts for my M416 I just got... Lunette Ring (Somebody hacked the eye off, rest of assembly looks fine) Landing Leg (Broke off) Tires & Tubes (duh) Wheel (Spare) I don't mind used here so if anybody here has converted their M416 to a different style coupler and still has the lunette please let me know, same goes for tires and the landing leg; tires and tubes must be new ;) Now for the part you'll all hate me for... I got it free ;)
IMG_0002.JPG
More pictures here: http://events.sequoia4x4.com/v/20061210-m416/?g2_highlightId=16954 Thanks, Sequoia
 
Now for the part you'll all hate me for... I got it free ;) Thanks, Sequoia

It is the Jeep we hate you for ;)

GREAT FIND! I have had good luck on Ebay finding a lot of the stuff you are looking for. That is a good looking trailer, and for FREE, what a steal!

Check with any local military surplus stores in your area, but Ebay still has a great selection if you are looking for some of the harder to find parts.

Have fun with that thing... I will give you a hundred bucks today for it ;)

Rezarf <><
 
I may be switching my tires and rims to ones that match my 4runner, I will take pics of the tires, rims, etc.... today and post them. My spare rim is in good shape, but the spare tire and tube are just something to get me by if something happened. I'll get back here later today.
 
I have a landing leg specifically for your trailer, bought it for mine then changed the tongue to suit what my tires would not allow me to do. Stabilize it while parked. Call me or email me at Rubiconcruiser@msn.com. 818 355 7986
 
Linnette Ring Replacement

I bought a M-416 a few years ago, Same Problem, I found a Ring Bolt at a Local Orchards Hardware, Not Usally in Stock, the come threaded on one end, it can be Ordered, It cost me around 50.00, when i bougt it, You are going to to need at least a 3" inside Diameter Hole for a standard Pintle Hitch,. Or you can purchase a ring through Northern Hydraulics, its a industrial Supply Company.
 
Here is the landing leg casting piece you need.
 
check out barstow truck parts in Barstow,Ca i bought my tires there 75.00 for a set already mounted this was 2 years ago but they have a trailer full of coopers good luck
 
I have a m416 that I am giving up on... The body is rusted through and 1 spring is broken. If you are interested in any of the parts let me know.

Todd Hubbell
 
Where are you located?


I have a m416 that I am giving up on... The body is rusted through and 1 spring is broken. If you are interested in any of the parts let me know.

Todd Hubbell
 
I have a m416 that I am giving up on... The body is rusted through and 1 spring is broken. If you are interested in any of the parts let me know.

Todd Hubbell




Lunette ring assembly and landing leg assembly.



Let me know if you have these pieces.


Thanks!
 
M416 parts

Where are you located?

Lunette ring assembly and landing leg assembly.



Let me know if you have these pieces.


Thanks!

I'm located in Southern Louisiana (Thibodaux, LA. 70301). Once my "new to me" CDNm101 comes in I will be more than willing to ship out any part off of the 416.

I will take pictures of every part this week (weather pending) and the www address of them.

some of the parts I have:
lunette,
lunette casting,
landing leg and piece that connects to casting,
frame (good condition)
fenders (good condition)
3 rims in good condition (surface rust only)
2 rims not so good (bad rust)
3 tires in OK condition... they hold air.
complete axle (hub to hub with working brakes)
springs, one is good, one is missing a spring eye
spring plates
spring mounts

BODY.... bad shape. the only panel without rustthrough is the rear pannel. (Photos later.)

If someone wants the handles and hooks off of the body I can remove them and send the parts to you.

Again give me some time to post up photos...

Todd H
Thibodaux LA 70301
 
I'm located in Southern Louisiana (Thibodaux, LA. 70301). Once my "new to me" CDNm101 comes in I will be more than willing to ship out any part off of the 416.

I will take pictures of every part this week (weather pending) and the www address of them.

some of the parts I have:
lunette,
lunette casting,
landing leg and piece that connects to casting,
frame (good condition)
fenders (good condition)
3 rims in good condition (surface rust only)
2 rims not so good (bad rust)
3 tires in OK condition... they hold air.
complete axle (hub to hub with working brakes)
springs, one is good, one is missing a spring eye
spring plates
spring mounts

BODY.... bad shape. the only panel without rustthrough is the rear pannel. (Photos later.)

If someone wants the handles and hooks off of the body I can remove them and send the parts to you.

Again give me some time to post up photos...

Todd H
Thibodaux LA 70301



You have PM.


:beer:
 

Users who are viewing this thread

Back
Top Bottom