need help with timing on a 2f

[crazy60]

does any body know where to set the timing on a 2f as mine is f%$#ed it is missing heaps plugs and points are fine

 

[Tinker]

Points? What year is it?

 

[Mr. Toad]

does any body know where to set the timing on a 2f as mine is f%$#ed it is missing heaps plugs and points are fine

The factory setting (7deg BTDC) is marked by a BB on the flywheel that can be seen in the timing window.

The timing window is an opening above the starter at the back of the engine. The opening has a needle pointer for lining-up the BB.

To set the timing, the set-bolt under the distributor must be loosened so that the distributor can be rotated. Rotate it until the timing is correct, then re-tighten the set-bolt.

 

[dfmorse]

See Toyota 2F engine manual #98126, page 2-8, 7 degrees BTDC.
Also the Haynes manual #313 , page 92

See Tech link for further help:

http://www.ih8mud.com/tech/vacuum.php

...