Need advice on suspension issue or maybe not! (1 Viewer)

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

So, Billy, I highly suggest you try and take Eric up on his offer to help diagnose the problem.

Also, your welcome for the picture.. I just couldn't keep my eyes off of the beauty.
 
I def plan on it!! It's always good to learn a few tricks!! And will never turn down good help! Also thank you for posting the pic! If your free tomorrow hit me up we are gonna be working on Matt (BarnFJ) 40 putting a new harness in! I'll be sure to take pics, so y'all know that it happened!!! And if anyone wants to join pm and I'll give ya the details!!! And again thank y'all, Finaly got all my pics up loaded to the computer and next step is getting them up here I got all the b4 and after ones, from complete stock to bumper replacement to lift should be up tomorrow night!!!
 
Thank you sir, she is fun to drive to!!!

So... did they install Slee's castor plates and castor bushings into the front control arms? How mush castor is needed for the 6" lift?
 
So... did they install Slee's castor plates and castor bushings into the front control arms? How mush castor is needed for the 6" lift?

The 6" kit includes new control arms. He should have everything needed to get it tuned. I would look at the rear pinion angle, I'm guessing they just threw the adjustable arms in there without adjusting them. probably wouldn't hurt to check the length of the panhard rods either.
 
I just read the instructions on the slee site for the 6" lift, it just says to shorten the rear upper control arms by 1/2" and reinstall - I would definitely start there, I can't imagine those angles are magically aligned without some fine tuning.
 

Users who are viewing this thread

Back
Top Bottom