Name that bolt!

[phippsj]

Anyone know the oem part number for the eight bolts holding on the plastic "No. 2 under engine cover"? It's a tapered self-starting bolt with a captured washer under the head. I can't find it identified in any of the IPC's.

The threads on mine are all jimmied-up from all the R&R's.

Thanks,

 

[NWForester]

Try this.

...via IH8MUD app

 

[phippsj]

Thanks!

Where did you get that page?

 

[NWForester]

http://www.toyotapartsoverstock.com/s/TOYOTA_2000_LAND-CRUISER/parts.html

Driveline--->Suspension Crossmember & Undercover

...via IH8MUD app

 

[hankinid]

Anyone know the oem part number for the eight bolts holding on the plastic "No. 2 under engine cover"? It's a tapered self-starting bolt with a captured washer under the head. I can't find it identified in any of the IPC's.

The threads on mine are all jimmied-up from all the R&R's.

Thanks,

Half of mine were goobered too. Instead of a 50 mile round trip to Lexus (not to mention probably payying through the nose, I simply replaced 'em from the local hardware store with metric flanged bolts...

Thread is 8mm x 1.25mm x 20mm long. In addition, I used a 5/16 x 1" fender washers. You may want to run a tap through the captive nuts before installing the new fasteners, with a bit of Never-Seez.

hth

Steve

 

[phippsj]

Yep. Always chase the threads with a tap.