manual locking hubs
- Thread starter jer1
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
A manual hub conversion on a 90 series equipped with ADD is no simple task. Aside from buying hubs, you'll have to replace axle shafts, outer CV joints, seals, wheel bearings, boot clamps, and other hardware.
You can buy the hub conversion kit for around $1000, or try to find a used front diff from a Tacoma equipped with manual hubs. These are pretty hard to find.
Off Road Solutions sells a manual hub conversion kit for the 3rd Gen 4runner kit that fits the 90 series, you can go with WARN or AISIN hubs.
You can buy the hub conversion kit for around $1000, or try to find a used front diff from a Tacoma equipped with manual hubs. These are pretty hard to find.
Off Road Solutions sells a manual hub conversion kit for the 3rd Gen 4runner kit that fits the 90 series, you can go with WARN or AISIN hubs.
