Looking for Oregon Machine Shop Suggestions

[roaminglost]

I decided to rebuild my 1hdt with a new head and want to do a full refresh. Looking for suggestions on a machine shop in Oregon to do the work.
I’m based in bend. But willing to go wherever in the state.
Thanks in advance!

 

[Guyute]

Bearing Service Co on NW Everett in downtown Portland. They know the HZ/HDT well.

 

[roaminglost]

Bearing Service Co on NW Everett in downtown Portland. They know the HZ/HDT well.

awesome thanks ill reach out to them.

 

[DrDuc]

Bearing Service Co on NW Everett in downtown Portland. They know the HZ/HDT well.

They did a great job on my 1FZ-FE head.

 

[mudgudgeon]

@Fj80oregon might have a suggestion.

He's regularly rebuilding engines in Oregon

 

[roaminglost]

@Fj80oregon might have a suggestion.

He's regularly rebuilding engines in Oregon

They did a great job on my 1FZ-FE head.

Bearing Service Co on NW Everett in downtown Portland. They know the HZ/HDT well.

Unfortunately, he is retiring, and going with a shop that plans on closing doors VERY soon is not a good idea.

 

[Guyute]

Bummer. So BSC is closing forever? That's a huge loss.

 

[roaminglost]

Bummer. So BSC is closing forever? That's a huge loss.

yessir.

 

[Fj80oregon]

Are you needing the block rebuilt? And assembled into a long block? Or just a short block?

 

[roaminglost]

Are you needing the block rebuilt? And assembled into a long block? Or just a short block?

We're going with a new head, so we need it to be matched up and also need to replace the internals on the short block. (trying to rebuild the entire motor)

 

[OGBeno]

I decided to rebuild my 1hdt with a new head and want to do a full refresh. Looking for suggestions on a machine shop in Oregon to do the work.
I’m based in bend. But willing to go wherever in the state.
Thanks in advance!

New short blocks are available from abroad. Might be easier just to get a new one and away you go.

Last one I sourced took about 10 days from order to delivery to get.

 

[roaminglost]

New short blocks are available from abroad. Might be easier just to get a new one and away you go.

Last one I sourced took about 10 days from order to delivery to get.

any insight on where to get one?

 

[OGBeno]

any insight on where to get one?

Contact Dave Stedman at Japan4x4

 

[roaminglost]

Just to update anyone else looking for a machine shop G & A did an exceptional job

G&A CYLINDER HEADS, INC. · 4941 NE 105th Ave, Portland, OR 97220

★★★★★ · Auto machine shop

maps.app.goo.gl