Iron Pig Seats- Vinyl or Velour

[smtyblt]

Hi everyone this is cam @ IPOR glad everyone likes the seats

Just piping up to let everyone know we are extending the free shipping untill the first of the year!!!!!!!!!!!

 

[calphi27]

Hi everyone this is cam @ IPOR glad everyone likes the seats

Just piping up to let everyone know we are extending the free shipping untill the first of the year!!!!!!!!!!!

WHAAAAAAAAAAA?

 

[DirtyLittleSecret]

Dirty here,
just reporting that Lance & Cam earned my $, and just placed my order with them for a pair of grey vinyl seats. Will report back when I get the goods, and will write up how easy the installation is.
Free shipping's such a good deal that even Mrs Dirty decided that vinyl was worth it!

 

[RockDoc]

Damn, I had this pegged for a year or so off, but free shipping is tempting.....

 

[chukardog]

My wife will be ordering these for my Xmas present

 

[chichiflys]

I purchased the same seats from Summit Racing - they are made by Procar - Elite Series 1100. $240 each plus $18.95 for shipping and handling ($8 for shipping, $10.95 for the handling charge). I'm pretty sure they are the same seats that IPOR carries and they bolted right in with no problems. I just took the rails off the stock seats and put them on the new seats. I got teh tan ones and the passenger side is backordered until Dec 5th.....
Her's a link:
http://store.summitracing.com/partd...1&part=SCA-80-1100-52L&N=700+115&autoview=sku

 

[RockDoc]

For those with these, do the seat backs angle forward farther than the stock seats? (i.e. can you get a driving position closer to vertical?)

How do they compare for leg room/backward travel on the rails? Could they be set up offset slightly back from the stock spacing?

 

[chichiflys]

Yes they angle forward quite a bit. Also - if you have a big butt...these might be a little tight on the hips.

I think they are a nice fit for the FJ60. You could mod the rails to make the leg room what ever you like I suppose - but for an easy swap they are great.

I still have the stock passenger seat in the truck - when it stops raining I'll try to snap some pics of the differneces. But it's Seattle - so don't hold your breath on the rain.

 

[RockDoc]

Hmmm, these are sounding real nice, but I've been in a spendy mode lately so......... have to think more.

 

[Spook50]

I had these seats in my Last FJ62...and Iam plan to order them again! I had the Vinyl and they are very high quality!

Hey very nice. Do they sit higher than the OEM seats? How's clearance underneath? I ask because my amplifier is mounted under my passenger seat...

 

[chichiflys]

Hey very nice. Do they sit higher than the OEM seats? How's clearance underneath? I ask because my amplifier is mounted under my passenger seat...

The stock rails bolt right up to the bottom of these seats - so the clearance underneath should be the same. If anything I think they sit a little lower - I read another thread where the guy had to add spacers to adjust the height - I like the new position myself.

 

[NocalFJ60]

The stock rails bolt right up to the bottom of these seats - so the clearance underneath should be the same. If anything I think they sit a little lower - I read another thread where the guy had to add spacers to adjust the height - I like the new position myself.

Both the seats left side seats so the recline lever on the left side on both? You have any pictures?

 

[Sherpa 60]

A buddy had a set in his 40. Superfirm, which is OK by me. Had a few tars after a couple of years but given the price a good deal IMO. Velour...good if you have a 1980's Lincoln.

 

[RockDoc]

Got 'em (vinyl) and love 'em.

 

[DirtyLittleSecret]

I really HATE posting this but...I cannot for the life of me get a response back from anyone at Iron Pig Off Road.
I am still waiting on my correct replacement headrest "clip" from IPOR, and simply cannot believe it takes this long. I am currently planning to turn my purchase into my credit card company as defective product. The supplier has sent me two incorrect parts, and I am still with a faulty headrest (wont lock into place).
Personally, I feel it a safety issue since I am 6'3" I need the headrest fitted to my height.
Some of this is posted in frustration, but since they wont answer my needs I figured they might hear me here. If anyone knows where I can get the locking clip in grey it would be much appreciated.
Otherwise, nice seats.

 

[cruiser88]

I really HATE posting this but...I cannot for the life of me get a response back from anyone at Iron Pig Off Road.
I am still waiting on my correct replacement headrest "clip" from IPOR, and simply cannot believe it takes this long. I am currently planning to turn my purchase into my credit card company as defective product. The supplier has sent me two incorrect parts, and I am still with a faulty headrest (wont lock into place).
Personally, I feel it a safety issue since I am 6'3" I need the headrest fitted to my height.
Some of this is posted in frustration, but since they wont answer my needs I figured they might hear me here. If anyone knows where I can get the locking clip in grey it would be much appreciated.
Otherwise, nice seats.

They got hit by a tornado

 

[RockDoc]

https://forum.ih8mud.com/chit-chat-section/220554-iron-pig-offroad-tornado.html

 

[cruiser88]

slacker

https://forum.ih8mud.com/chit-chat-section/220554-iron-pig-offroad-tornado.html

 

[RockDoc]

I'm brushing my teeth, that doesn't go well with typing.

 

[DirtyLittleSecret]

Wow. Dang.
While the tornado is a relatively recent event when compared to my now over 6 months anxiously waiting for a silly little part, I'm terribly sorry to hear about the tragedy. I hope they will be able to bounce back.