For Sale HJ61 Altimeter consoles

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Nov 14, 2003
Threads
82
Messages
2,157
Location
Greendale B.C Canada
Location
United States
JDM 60 Series altimeter consoles, 1 complete unit $150
1 missing temp gauge $100, 1 bare housing $60
Prices in USD, incl postage to lower 48.
Theses come out of 24volt trucks, Altimeter is standalone, so just swap a 12v bulb in. Getting
Thermometer display functional will be a bit a tricky. Personally I would gut gauge and use for gauges or UHF radio.
 
Last edited:
6E2F31CD-F3E7-418D-9E36-1A694AD44E10.webp
6E2F31CD-F3E7-418D-9E36-1A694AD44E10.webp
6DA8C05C-1ABD-4169-9A9F-ED41C18C41CE.webp
 
Sorry- so on the complete unit does the thermometer AND altimeter work?
Thanks
J
The thermometer display may work but there is no inside/outside temp probes included...and it’s 24v circuitry too.
Altimeter is standalone Gauge, so it should work as well as you can expect from a 30 year old barometric altimeter gauge. In other words, I wouldn’t go bolting it in your Cessna.
 
Gotcha, then the Voltage should be good. I’ve seen a few with circuit board failure over the years so temp wouldn’t work.
 
Sorry guys, did a purge and turfed all this stuff.
 
Back
Top Bottom