ARCHIVE HD Soft Shackle Recovery Points for 60/80/100

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

You simulate at the angle that would yield failure at the lowest loading (intuition or trial and error), then set your minimum safety factor for your listed WLL from this number. That angle will probably be perpendicular to the plane of the eyelet. Are these made from A36 steel plate? Don't forget a HCF simulation also, for those who like to get stuck often. It may cover you if you do this and have a 3rd party load test your findings. Clearly stamp the WLL and breaking strength on them. It would be good to know what an average peak force is for a recovery using a strap or cable (not a yankum style rope). Could use a load cell and test if you had one big enough. As for the bolts you cant control what people use but you could specify a minimum size and grade. For simulation just affix one side of the mounting holes, could use the edge. Or could affix the surface of the plate that would touch frame and assume no separation between the frame and your component. Cool machining and Nice part!
Yes, these are fiber or co2 cut and milled from a36 HRPO steel, I may mess around with T1 on a future run.
 
Had some people message me before the holidays regarding recovery points, they are currently in production and have 4 sets available.

Feel free to message. Have a great weekend.
 
Last edited:
Still have a pair in black PC?
 
Still have a pair in black PC?
Currently I don't have any in stock, I can put a feeler out though and if anyone else is in the market I'll whip some up.

Preorders can be placed by sending me a message. If at least 3 sets are preordered I'll get them in the schedule.
 
Hey guys I have one set on preorder, would be nice to do a run of at least 3 sets if anyone else was interested PM me asap. Thanks in advance 🤙🏻
 
If anyone is interested I currently have one set powder coated red and one set bare metal available in stock.

Also have one medium duty 3/8" material set available for $100 or $120 powder coated.

🤙🏻
 
Currently in stock ready to ship:

- One set powder coated red (ships same day as ordered)
- Two sets bare metal (powder coating add 2 days handling time)

🤙🏻
 

Users who are viewing this thread

Back
Top Bottom