ARCHIVE HD Soft Shackle Recovery Points Available 60/80/100 series

[CPACruiser]

Hey 100 series owners, 80 series owner here cross posting my new product. The first run sold out to my fellow 80 owners over in that forum... these work for 60 and 100 series cruisers as well.

FJ80 FZJ80 HZJ80 HDJ80 HDJ100 UZJ100 FZJ105 HZJ105 (can be mounted to front or rear of vehicle)

Laser cut, CNC bent, CNC milled fully rounded soft shackle pass thru. 1/2" steel...they're beefy.

Available in bare metal, black powder coat and red powder coat.

(Prices per set of 2)
Bare metal $145
Powder Coated $155
1 pair shipping is $8.50
Up to 4 pair ship for $14.50

PM for details on purchase.

Or simply Paypal overlandcpa@gmail.com your order and address.

Thanks!

 

[TexLXCRZR]

you have a photo of the powder option?

 

[jLB]

Do these clear the “box” of ARB bumpers on the 100 series?

 

[CPACruiser]

you have a photo of the powder option?

The red is Tahitian Red by Prismatic (it's basically vintage 70s Honda MX Red)

I'll post pictures tonight

 

[CPACruiser]

Do these clear the “box” of ARB bumpers on the 100 series?

View attachment 2968685

Send me measurements of that box I'll confirm

 

[jLB]

Send me measurements of that box I'll confirm

I’ll see what I can do over the weekend.

 

[CPACruiser]

I’ll see what I can do over the weekend.

Sounds like 10% off your order for R&D

 

[CPACruiser]

Flat black (80 series crank pulley holder)

Tahitian Red 60/80/100 soft shackle recovery point

 

[Live to Ski]

Looking for these in the "soft shackle" configuration.

Also, are they rated?

 

[CPACruiser]

I have 3 sets available already milled with the soft shackle radiuses.

They're not "rated" no.

However similar configurations exist made out of 3/8" material and are rated.

I see no real need to get them rated when I ran simulations on solidworks and there's more than sufficient comps out there made out of thinner material.

 

[CPACruiser]

Currently have one set of red powder coated with radiuses and two sets bare metal with radius.

 

[CataclysmSX]

Per post #3, do these clear the ARB box? I have bought several that said they would and didn't end up doing so. Do you have measurements from the hole center to each edge? I want to verify they will clear my ARB box. If so, I will purchase immediately.

 

[CPACruiser]

Per post #3, do these clear the ARB box? I have bought several that said they would and didn't end up doing so. Do you have measurements from the hole center to each edge? I want to verify they will clear my ARB box. If so, I will purchase immediately.

I have multiple customers running these with ARB bumpers, You will need a spacer and longer bolts for this application.

I can whip some spacers up in a few days time for $50 additional.

 

[CPACruiser]

Per post #3, do these clear the ARB box? I have bought several that said they would and didn't end up doing so. Do you have measurements from the hole center to each edge? I want to verify they will clear my ARB box. If so, I will purchase immediately.

I have multiple customers running these with ARB bumpers, You will need a spacer and longer bolts for this application.

I can whip some spacers up in a few days time for $50 additional.

 

[CataclysmSX]

I have spacers already, and the longer bolts. I just need the shackles. Send me an invoice for 1 pair of the powder coated, and I will give these a go.

 

[CPACruiser]

I have spacers already, and the longer bolts. I just need the shackles. Send me an invoice for 1 pair of the powder coated, and I will give these a go.

Sent you a direct message

 

[TexLXCRZR]

Currently have one set of red powder coated with radiuses and two sets bare metal with radius.

do these come with hardware?

 

[CPACruiser]

do these come with hardware?

They do not, hardware is a debate, therefore I leave that up to the end user.

 

[Live to Ski]

I have 3 sets available already milled with the soft shackle radiuses.

They're not "rated" no.

However similar configurations exist made out of 3/8" material and are rated.

I see no real need to get them rated when I ran simulations on solidworks and there's more than sufficient comps out there made out of thinner material.

Got it.

w/re simulation: what is the material? what is the thickness?

I can then do some hand calcs to determine working and max loads for my application.

 

[CPACruiser]

Got it.

w/re simulation: what is the material? what is the thickness?

I can then do some hand calcs to determine working and max loads for my application.

A36 Steel @ .5" thickness with 90⁰ bend

Calculations I ran had a straight line pull WLL over 14,000 lbs for one.