H55 input shaft seal

[Katsarata]

Hi all
Anyone know the part number for a input shaft seal H55 gearbox ??

 

[OGBeno]

What application?

 

[Katsarata]

What application?

Hi Beno
Don't understand sorry.
I have a 1HD-Ft coupled to a H55F 5 speed box in my BJ40 and the input shaft seal is leaking.

 

[OGBeno]

90311-32013: seal for the front bearing retainer/input.

 

[Katsarata]

90311-32013: seal for the front bearing retainer/input.

Thanks Beno are there any variants or were all H55's the same ?

 

[OGBeno]

I'm guessing you have an H55F with the correct input for a 1HZ or a 1HD-T then, that's the seal you need.

 

[Katsarata]

I'm guessing you have an H55F with the correct input for a 1HZ or a 1HD-T then, that's the seal you need.

Thanks Beno

 

[Katsarata]

Quick update
Got the box off and the oil was not coming from the shaft seal turns out the the transmission shop failed to use a gasket sealer when they put the bearing /seal retainer back in and it was weeping from one of the bolt holes, also noticed when cleaning said retainer that there was a small nick in the surface allowing oil into the bolt hole gasket sealer sorted the issue.

 

[Jazztyme]

Curious to know if it is advised to just used FIPG for the gasket surface and in the bolt holes, or a oem gasket and just FIPG in the bolt holes as per manual? About to do mine this weekend.