Group buy-Fender extensions-interests?

[FishNinJay]

this is awesome i am in for this for sure

i want one

The hood lock system is interesting. I'm passing on this, because I'm not sure if I have the clearance in front for this hardware. Also, if I have no top, you can just reach in and pop open the hood, right? My friend has a totally re$tored original army medic jeep, stock everything, and he has it secured with small chain link welded to the hood corner and the front. Runs a gun cable lock thru there. The hood opens up only enough for him to get his hand in to unlock with key. Works nice. Seems secure enough. Sorry for the off-topic tangent post.

I'm probably going to get the hydraulic hood lift and the fenders.

 

[FishNinJay]

X2 how much for this setup (hood lift) also can you still get these side mirror arms there . like in the pic of the 45 you posted in the other thread.
see pic i would like a set of these mirror arms if possible also

Dear Mr. 'pbgbottle'

For hood lift is USD 15.00.
And the product is easy to use.
You don't need to worry about how to apply this product on your vehicle.
Just drill and screw.

For side mirror arms, I did not buy these mirror arms.
But I just copy the picture and I am interested to make it by myself.
So I make it by myself.

Or perhaps, you can make it by yourself in United States.
It is very easy to make this mirror arm.
So you can adjust the height as you wish too.

If you are interested with, I can make one pair, especially for you.
What length or height do you wish too?

Thank you.

Okay, >SNIP<

About the mirrors that mount on the windshield hinge or front panel, I can make a set for you.
Also the hood lift, I will prepare one set of hood lift for you.

Do you want the mirror arm only or include the mirror glass?

Thank you.

I like these mirror arms. I can't see my passenger-side mirror thru the side window. My roll bar blocks. I'd be interested in these mirrors, the arms for both sides, and a convex (bubble) rectangle mirror.

Also, the fenders, and the hood lift.

THANKS...

 

[sblesse]

I'm in for the fender flare set. 76' FJ 40

 

[Off Duty]

pm's will go out on Monday. I will ask you to respond via email just to make it more convenient for me to keep track of everything during my workday.

We'll arrange payment and shipping at that time.

Gordon

 

[Roberto]

if not too late, I am in for a set of fender flares for front and rear and a hood gas spring setup. For my 83' BJ42

Thanks
Rob

 

[Off Duty]

No problems.

Everyone that's posted here or sent me an email (stateside) will recieve a PM on Monday. If your PM box is full, please clear it out. If you're not set up to recieve member PM's, please change that authorization prior to Monday morning.

Then let's get this thing done!!
Thanks

 

[dblugly]

Can you make a snorkel for the right side? If so I am interested. Thanks Kris.

 

[bursabaju]

Snorkel at Right Side

Dear Sir,

I also can make a Snorkel for Right Side.

That should be not a problem for me.

Thank you.

Best Regards,

Mr. Ong David Wahyudi
Indonesia

 

[bursabaju]

Dear Mr. 'Off Duty'

Dear Mr. 'Off Duty'

From someone opinion :
- He ask me to make a snorkel on right hand.

I can make the snorkel in any side, either left side, or right side.

IF there are the same request for any United States customer, please let me know, how many pieces snorkel at right side in that order.

IF the customer did not tell you which side, perhaps I will make it for left side snorkel.

And I think it should not be a problem, whether they put the snorkel on left side.

Thank you.


Note:
I also offer these parts for snorkel use.

Snorkel Mount Bracket : USD 5.00.

The price is USD 76.00 for snorkel hose around 3-4 metres, in picture.

(I supply this length, if it is too long, it can be cut....otherwise if it is too short, the customer will have some difficulity to use it. I think the length 3-4 metres is ideal)

And the hose tie is USD 10.50, in picture.

You can order any quantity, I predict the ideal number is 6 pieces for one car.
So the total is USD 63.00 for one car.

Both of them are special made for automotive.

If some of your customer would like to buy, please let me know.

pm's will go out on Monday. I will ask you to respond via email just to make it more convenient for me to keep track of everything during my workday.

We'll arrange payment and shipping at that time.

Gordon

 

[bursabaju]

The prices as before

Parts :
- Snorkel Hose : USD 76.00 (length 3-4 metres)
- Snorkel Hose Tie : USD 10.50 / pc (ideal use 6 pieces : USD 63.00)

- Hidraulic Strut : USD 15.00 (Pic 1)
- Hidraulic Strut Mount Bracket : USD 10.00

- Hood Locks : USD 36.00 (Pic 2)
- Hood Cable : USD 6.00

- Yellow Front Turn Signal : USD 35.00 (Pic 3)
- White Front Turn Signal : USD 45.00

- Rear Corner Reflector : USD 6.00 / Pair Aftermarket brand (Pic 4)
- Rear Stop Lamp : USD 20.00 / Pair Aftermarket brand
- Telecospic Mirror : USD 38.00 / Pair (Ownself special made for Mr. ARC1)

 

[bursabaju]

Hood Lock, Cable Pictures

Hood Lock, Cable Pictures

 

[bursabaju]

Front Turn Signal : Yellow & White Color

Front Turn Signal : Yellow & White Color

 

[bursabaju]

Rear Reflector & Rear Stop Lamp

Rear Reflector & Rear Stop Lamp

 

[FishNinJay]

Parts :

- Hidraulic Strut : USD 15.00 (Pic 1)
- Hidraulic Strut Mount Bracket : USD 10.00 (Pic 2)

- Telecospic Mirror : USD 38.00 / Pair (Ownself special made for Mr. ARC1) (FJ45 Mirror)

I'm interested in the mirror arms and mirrors (convex).

And, the Hydraulic Hood Lift, but looking at the picture, I'm wondering if it will bolt onto my hood in the same locations. It looks like your yellow truck hood has a center support that the strut bolts into. Mine does not.

Will this work in my rig, if I bolt to that cross support, close to the hinge? If not, I may be able to make it work with the center support directly, without using the hood mount plate? Worth a try... Any thoughts on how best to make this work?

 

[dblugly]

Mr. Ong David Wahyudi

Awesome! I will take a Right Hand snorkel with the mounting bracket. I will not need the hose.
Thank you

 

[bursabaju]

Mr. ARC1,

I put the center support by myself.
I modify them, so it can support the hidraulic strut.

Don't worry, just think simple.
It is quite simple, and I believe everyone can do it easily.

If you are not using the hood mount plate, I worry it will take some effect, the other reason is the bolt facing not the same direction as yours. (I am sorry, I don't know how to explain in English about the negative effect).

*The best way* you can put the hood mount plate.
You can make the hood mount plate by yourself there..my suggestion for you to put the hood mount plate.

I'm interested in the mirror arms and mirrors (convex).

And, the Hydraulic Hood Lift, but looking at the picture, I'm wondering if it will bolt onto my hood in the same locations. It looks like your yellow truck hood has a center support that the strut bolts into. Mine does not.

Will this work in my rig, if I bolt to that cross support, close to the hinge? If not, I may be able to make it work with the center support directly, without using the hood mount plate? Worth a try... Any thoughts on how best to make this work?

 

[bursabaju]

My vehicle is the same as yours

My vehicles is exactly the same as yours.
Don't worry so much..Mr. ARC1.
Just do it...

Mr. ARC1,

I put the center support by myself.
I modify them, so it can support the hidraulic strut.

Don't worry, just think simple.
It is quite simple, and I believe everyone can do it easily.

If you are not using the hood mount plate, I worry it will take some effect, the other reason is the bolt facing not the same direction as yours. (I am sorry, I don't know how to explain in English about the negative effect).

*The best way* you can put the hood mount plate.
You can make the hood mount plate by yourself there..my suggestion for you to put the hood mount plate.

 

[Sagesniper]

Whats going on with this. I did not get a PM on this. I want the flares. Have the PMs not been sent as of yet?????

 

[Sagesniper]

Group buy fender extensions

What is the status of the group buy. I have not gotten a PM reguarding this. Has anyone else not been notified.

 

[Off Duty]

Whats going on with this. I did not get a PM on this. I want the flares. Have the PMs not been sent as of yet?????

Sorry, must have missed you?

PM coming...