Build Goat. A 1967 survivor FJ-45 LWB

Member Build Threads

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

😂

@wngrog what’s the payload capacity on that UTV?
Rated at this but it’s about 1/2 what it will do. My buddy has one he hauls seasonal workers around in a 20’ trailer with 20 men in it.

9F08EFEE-E6D5-4FF2-BBB1-C9C6181990A1.webp
 
Happy 4th with me anniversary to the Goat.

Today I rolled it on the lift for the first time since the full disc 3.70axle/4 speed/split case/2F/Sniper swap and gave all the bolts a once over. 14 months. Nothing mess loose not leaking. That was the best thing I ever did making this truck a fun driver.

Also I gave it a birthday present of a spanking new @OPMACHINE rear bumper.

Detailed install thread coming so he can point people at it that want one. Superb product. Absolutely beautiful.

A0266321-A217-44FD-A66B-CF8121CD0770.webp


AAC6B92B-723C-4DC9-AFD6-A69CC5D933AA.webp


ECD10BD2-82BF-4A0E-9E4B-7434367C5E6F.webp


48888340-E688-45BF-8206-7905ECB6A7CD.webp


01FF3B60-FDFF-42E8-9B5C-592989F74602.webp
 
Is that gap as big as it looks or an optical illusion?
Either way looks solid and well made
There is a gap but he’s got a lot to work around the main thing is the downturn on the edge of the bed they have a bit of clearance. The only way to make it tighter to the bed is to make it short and inside that.

It’s very clean. Gap looks correct to me for a pickup bumper.

36F641E0-C4AC-4D23-88FD-015B7DB59362.webp


06BE5BFF-30AD-4F24-9A07-A1767F551D6C.webp
 
Is that gap as big as it looks or an optical illusion?
Either way looks solid and well made
Some better photos for you

455D7A0D-02F9-40EC-96AF-7DA1A9D391A4.webp


30EA890F-CC03-4788-A6F3-52E1038116F1.webp
 
Oh jeez!
Let’s here the story!
I have a dump where I burn boxes and construction junk. It jumped out and got into the pine straw and took off. I found it after it was about an acre. I think I got it after it got about 2 acres.

This morning it was still smoking

DFCA518A-83C0-4D81-BEE3-E22E0A7281A6.webp


D6BC7857-5246-4C6E-BF55-06CDD268F8D6.webp
 
Yesterday would have been perfect conditions for a prescribed burn in this section of land but I was not anywhere close to prepared for that.

We have to many tees on the ground from last years storm to do it right.

9B00DB4D-A91D-4FD0-AEA0-BA9AC6CEDFBF.webp
 
Ready for a thread on that brown 60…Powda Blue was completed, what, two days ago?
 
Thought you were doing the red 45 next???? Brother of the mustard 40 you did a few months ago.

The 60 is one of @jomelo ’s friends so I’m going to build it up and take it down there and bring the 45 back. We don’t have a motor for the 45 yet
 
Yesterday a friend of mine was liking at the Goat and must have put it in neutral.

This morning in was leaving early and saw it had rolled out into my fire pit area

E463BE35-916D-461E-AAC5-B1C1479EF0D8.webp
 
Back
Top Bottom