okay i am trying to figure out what gear ratio in an axle i have.. on the carrier gear the last four digits are..
41 11
41 11
gear ratio question
- Thread starter fj40taz
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
72cruzerfj40
Isn't that a 3.73? You divide the 41 by 11 and get 3.727 etc. What year is ur LC?
Isn't that a 3.73? You divide the 41 by 11 and get 3.727 etc. What year is ur LC?
Sorry, didn't pay attention to the '74 year of ur cruiser. Sounds like someone changed it out, or I could be wrong.
- Thread starter
- #4
sorry it was not for my landcruiser.. helping a buddy out with his vehicle and trying to figure out what gear ratio he has so i can find a rear for his rig.
all of the bolt heads sheared off of the carrier except one and it tore up the pinon gear..
yeah somone else told me 3:73 but i wanted to ask a few places just to see..
all of the bolt heads sheared off of the carrier except one and it tore up the pinon gear..
yeah somone else told me 3:73 but i wanted to ask a few places just to see..
- Joined
- Sep 26, 2003
- Threads
- 117
- Messages
- 11,199
- Location
- Lancaster, Ohio, USA
- Website
- www.tlcperformance.com
I've never seen a 3.73 ratio for cruiser.
The only stock ratios in NorthAmerica are
37:10=3.700,
Or 37:9=4.111
The 4 1 11 on the edge of the RG is prolly the date code, 1974 January 11th.
The only stock ratios in NorthAmerica are
37:10=3.700,
Or 37:9=4.111
The 4 1 11 on the edge of the RG is prolly the date code, 1974 January 11th.
Just count the # of teeth on the ring gear and divide them into the # of teeth on the pinion gear.
Is there any numbers on the back side of the pinion gear?
isn't there a trick where you can mark the tire and mark the driveshaft, and count the number of times they go around?
that's a question?
that's a question?
Maybe 41 11 just means 4.11:1. Just a guess.
