For Sale front lock axle parts/+misc. out of 96lx from GA. ships from OH (1 Viewer)

[Tedward]

Location

United States

All axle and steer parts are from a 96lx from GA. and now live with me in Cleveland, OH. Some misc. things from my 95lc listed as well.
Shipping from Cleveland, OH. 44107 on your dime. Paypal is fine.
Pick up is fine too, but who the heck lives near Cleveland??
Post here, pm, e-mail or text Ed with any questions/comments or pic requests.
216-323-six six zero nine ecanant@yahoo.com
Prices do not including actual shipping cost.

locking front third - 300 sold
e-actuator - 300 sold
birfields - 35 each (have not been separated from axles shafts yet, nice) sold
axle shafts - 35 each (real nice oil seal surface) sold
axle tube - like anyone wants to ship a stripped tube. I would cut the ends off for 25 each.
hubs - 25 each
spindles - 20 each (have wear where the hub seal rides) one left
drive flange - 15 each sold
steer arms - 40 each
pan hard - 20 sold
tie rod - 20
drag link - 20
calipers - 25 for a set (have front and rears) decided to keep em
abs sensors - 25 each (rears) sold
rear drive shaft - 50 (used u-joints and with flange)
Also, have most of abs wire harness and mounting brackets, but not complete as the wires have been cut one place or another. - free "sold"

Misc. from unlocked 95 lc with all most 400,000.

air intake tube - 10 (old but no cracks and ran my truck nice) sold
rear heat assembly - 20 (worked fine, deleted) scraped
rear heat switch - 10
coolant bottle - 10
washer bottle - 10
abs actuator - 25 (worked fine, deleted) scrapped
I have all the abs sensors on my 95 that worked. Deleted the abs but left the sensors (and wires) in place to fill the holes. Removed abs actuator to make room. Tell me a good way to fill the holes and I have a whole abs set up for sale inexpensively.

non locking axle shafts - 20 each (good seal surface, nice)
birfields - 20 each (replaced for axle pm, no clicking) sold
5 oem rims with tapered lug nuts included - 200 (the "spare" still has the tire in photo)
hazard switch - 10

Will get some glamour shots of the locking third and actuator. The actuator is so nice inside... I mistakenly pictured a rear actuator in the family photo. I have deleted the close up pic of it (rear act.) and added pics of the correct actuator (the front).

View attachment 1222206

 

[swamp-thing]

Pm sent on locked birfs & axles etc.

 

[UAB1ENGNR]

PM sent on air intake tube

 

[mydogsmonkey]

The axle housing has all the suspension and other misc brackets stripped off?

 

[Tedward]

The axle housing has all the suspension and other misc brackets stripped off?

Yup, sure does. Long story short.... someone was going put this front axle and the matching rear under a Jeep but never followed through.

 

[mydogsmonkey]

Damn that's too bad. I was actually looking for a locker housing!(with brackets intact)

Yup, sure does. Long story short.... someone was going put this front axle and the matching rear under a Jeep but never followed through.

 

[duggy]

I'll take the abs wiring. I can pay for shipping

 

[Tedward]

We are talking about the less than perfect stuff I have, right? Wires, plugs and brackets. That is free. The two abs sensors (which are for the rear) not included.
If so, I will get it in ups box tomorrow and let you know the bill. Glad it will go to some use and not straight to trash heap.
Ed

 

[Tedward]

Glam shots of actuator.
Front/rear calipers close up. Are these calipers oem?

 

[Tedward]

Third member photos.
p.s. intake tube, free harness, drive flanges + 4 abs sensors all en route. shafts with birfields ready to go. working on splitting other birfs from axles.

 

[bonomonster]

Is the locking front 3rd member still available?

 

[Tedward]

The locking front third member and e-lock actuator are spoken for.
SPF

 

[Tedward]

Thanks to everyone that got some parts! Been nice and smooth sailing.
To the rest of you...get involved!

Whats left and a little cheaper prices, that still do not including shipping. You pay UPS, USPS, or Carrier Pigeon. What ever works for you.....

Front Hubs $20 each or $35 set
One spindle $15 has a little wear on seal surface. the other was worse and went in the scrap pile.
Pan Hard $15 scrapped
Tie Rod $15
Drag Link $15
Steer arms $30 each
Calipers $20 a set keeping these
Front Drive Shaft $40
coolant bottle $9.99
washer bottle $9.99 or $10 for both bottles with caps

I also posted an alum step plate (rear bumper part), front brake backing plates, and used blue hub fan clutch (clutch sold)
I do have a free 02 rear most O2 sensor. see pics in other thread by me.