Freebies need to be gone asap

[little_joe]

This stuff is going to the dump by the weekend - free to anyone if you take possession this week. Daytime I am on the NCSU Centennial Campus, evenings in Holly Springs. You or your proxy must pick up, no shipping.

FZJ80 stock transmission/transfer case crossmember and splash shield - very lightly bashed but still fine.

FZJ80 stock rear panhard with 17 yr old bushings.

FZJ80 stock rear e-locker motor protective splash shield/skidplate.

FZJ80 stock oak front seat headrests, in VGC.

FZJ80 original fan clutch.

 

[GLTHFJ60]

Is the e-locker skid thing substantial at all or should I look into getting an aftermarket one? Where does one look for said piece?

 

[jfz80]

Johnny, stock is not much protection.
Grab one from slee or inchworm......shoot I got one of each

If someone could meet Joe for the headrest that would be great, if I can make RDU this week Ill keep you posted Joe.

 

[GLTHFJ60]

Johnny, stock is not much protection.
Grab one from slee or inchworm......shoot I got one of each

If someone could meet Joe for the headrest that would be great, if I can make RDU this week Ill keep you posted Joe.

Edit: $60 for a stupid e-locker skid? Are you kidding me? Robbery I tell you, robbery.

I can meet up with Joe, not a problem.

Joe, if you need to get rid of the parts before Jason can make it up here, I'll take them off your hands. Let me know when you want to meet up.

 

[lt1fire]

Edit: $60 for a stupid e-locker skid? Are you kidding me? Robbery I tell you, robbery.

Welcome to the wonderful realm of extremely overpriced parts for the 80 series Cruisers.... it gets worse as you go towards the 100 series.

 

[GLTHFJ60]

Welcome to the wonderful realm of extremely overpriced parts for the 80 series Cruisers.... it gets worse as you go towards the 100 series.

At least there are parts. Try finding someone who makes custom fab parts like that for a 60

 

[krzyabncanuck]

I might know someone Johnny......

 

[GLTHFJ60]

I might know someone Johnny......

Let me take that back. Stan, Darin and Jerry, to name a few, can make custom parts for 60 series cruisers, but no one regularly produces aftermatket parts for 60s. ARB and a few others make bumpers, a fewer still make sliders and no one makes a skid like slee or ipor do for the 80.
/rant

 

[lt1fire]

Let me take that back. Stan, Darin and Jerry, to name a few, can make custom parts for 60 series cruisers, but no one regularly produces aftermatket parts for 60s. ARB and a few others make bumpers, a fewer still make sliders and no one makes a skid like slee or ipor do for the 80.
/rant

Though solid rock offroad did?? Either way most of the time custom parts are way cheaper to buy for the 80 than things that are mass manufactured.

 

[GLTHFJ60]

Though solid rock offroad did?? Either way most of the time custom parts are way cheaper to buy for the 80 than things that are mass manufactured.

Jim @ SROR built me a custom one-off bumper, but he's out of business now. It was a one man operation.

Also true. Oh well, such is life in the Cruiser hobby.