Flex Cable Protection for Fridge (1 Viewer)

[alvarorb]

I have a fridge and a fridge slide. Over the 20+ years of ownership, I've had to replace the fridge cable because it's gotten caught in the slide and nicked.
I found a solution that may work for you too: Amazon

 

[CharlieS]

That is a great choice. I run a similar setup in both my offroad camper and in my 200 when I have it set up for long trips.

Fridge tilt and slide leading edge protector?

I just moved my fridge tilt and slide to a different drawer system and am wondering if I should do something to protect the top edge from damage where they make contact. It is linex like used in truck beds, so it can probably take it, but it is also on a hard edge. I can't move the slide any...

forum.ih8mud.com

 

[landcrshr]

@alvarorb you're almost there. The moving end on the chain just needs to be secured with a bracket to the fridge slide. When fully extended, the chain should make a complete U-turn just before said bracket, like in the diagram. You might have to position the chain back a little further to accomplish that.

Cheers

 

[alvarorb]

Good point. I did that after I took those pictures. I did this mod back in November.